display observe-port

Function

The display observe-port command displays the observing port configuration.

Format

display observe-port

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After observing ports are configured using the observe-port or observe-port command in the system view, you can run the display observe-port command to check detailed information about the configured observing ports.

Example

# Display the observing port configuration.

<HUAWEI> display observe-port
  ----------------------------------------------------------------------
  Index          : 1
  Untag-packet   : No
  Forwarding     : Yes
  Interface      : GigabitEthernet0/0/1
  ----------------------------------------------------------------------
  Index          : 2
  Untag-packet   : No
  Forwarding     : Yes
  Interface-range: GigabitEthernet0/0/2
  Vlan           : 20
  ----------------------------------------------------------------------
  Index          : 3
  Untag-packet   : No
  Forwarding     : Yes
  Interface-range: GigabitEthernet0/0/3 to GigabitEthernet0/0/5
  ----------------------------------------------------------------------

# Display the observing port configuration (S5735-L, S5735S-L, S5735S-L-M, S5735-S, S5735-S-I, and S5735S-S).

<HUAWEI> display observe-port
  ----------------------------------------------------------------------        
  Index          : 2                                                            
  Untag-packet   : No                                                           
  Forwarding     : Yes                                                          
  Dynamic-alloc  : No                                                           
  Interface      : GigabitEthernet0/0/2                                         
  ----------------------------------------------------------------------        
  Index          : 3                                                            
  Untag-packet   : No                                                           
  Forwarding     : Yes                                                          
  Dynamic-alloc  : No                                                           
  Interface      : GigabitEthernet1/0/3                                         
  ----------------------------------------------------------------------        
  Index          : 4                                                            
  Untag-packet   : No                                                           
  Forwarding     : Yes                                                          
  Dynamic-alloc  : Yes                                                          
  Interface      : XGigabitEthernet1/0/3                                        
  ----------------------------------------------------------------------

**Table 1** Description of the **display observe-port** command output
Item	Description
Index	Index of an observing port.
Untag-packet	Whether to remove VLAN tags of original traffic.
Forwarding	Forwarding parameter value: Yes: An observing port can forward data packets. No: An observing port does not forward data packets.
Interface	A single observing port.
Interface-range	The observing ports in an observing port group.
Vlan	Layer 2 remote mirroring VLAN.
Dynamic-alloc	Whether the function of dynamically applying for observing port resources is enabled.