The display pim ipv6 claimed-route command displays the unicast routing information used by PIM (IPv6).
Parameter | Description | Value |
---|---|---|
ipv6-source-address | Specifies the IPv6 address of a multicast source. | The address is in hexadecimal format. |
The display pim ipv6 claimed-route command displays the unicast routes used by PIM (IPv6), such as the RPF neighbors, detailed information about interfaces, route types, and route selection policy.
# Display the unicast route of multicast source FC00:0:0:2001::2.
<HUAWEI> display pim ipv6 claimed-route fc00:0:0:2001::2 VPN-Instance: public net multicast load-splitting rule: source-group RPF information about: FC00:0:0:2001::2 in PIM-SM routing table RPF interface: Vlanif100, RPF neighbor: FE80::A01:100:1 Referenced route/mask: FC00:0:0:2001::/64 Referenced route type: igp RPF-route selecting rule: preference-preferred The (S, G) or (*, G) list dependent on this route entry (FC00:0:0:2001::2, FF03::1)
Item |
Description |
---|---|
multicast load-splitting rule |
Mode in which multi-cast loads are split. The following policies apply:
|
RPF information about: FC00:0:0:2001::2 in PIM-SM routing table |
RPF routing information with the source address of FC00:0:0:2001::2 in the PIM-SM (IPv6) routing table |
RPF interface |
RPF interface in a routing entry. |
RPF neighbor |
RPF neighbor in a routing entry. |
Referenced route/mask |
Route/mask used by PIM. |
Referenced route type |
Type of a route. |
RPF-route selecting rule |
Preferred rule for selecting the RPF-route. |
The (S, G) or (*, G) list dependent on this route entry |
List of multicast entries based on RPF routes. |