display port split

Function

The display port split command displays the current status of a split or merged interface.

Only the S5730S-EI, S5730-SI, S5730-HI, S5731-H, S6720-LI, S6720-SI, S6720S-SI, S6720S-LI, S6720S-EI, and S6720-EI support interface split and merge.

Format

display port split [ slot slot-id ]

Parameters

Parameter	Description	Value
slot slot-id	Specifies the slot ID.	The value is an integer and must be set according to the device configuration.

Views

User view, system view

Default Level

1: Monitoring level

Usage Guidelines

After interfaces are split, you can run this command to view the current status of the split and merged interface.

Example

# Display the current status of a split or merged interface.

<HUAWEI> display port split
*enable  : Will be enabled after board reset
*disable : Will be disabled after board reset

 Port           Status     Split Port
----------------------------------------------------
 40GE0/0/1      enable     XGigabitEthernet0/0/49
                           XGigabitEthernet0/0/50
                           XGigabitEthernet0/0/51
                           XGigabitEthernet0/0/52
 40GE0/0/2      enable     XGigabitEthernet0/0/53
                           XGigabitEthernet0/0/54
                           XGigabitEthernet0/0/55
                           XGigabitEthernet0/0/56
 40GE0/1/1      disable    -
 40GE0/1/2      enable     XGigabitEthernet0/1/5
                           XGigabitEthernet0/1/6
                           XGigabitEthernet0/1/7
                           XGigabitEthernet0/1/8
 40GE0/1/3      disable    -
 40GE0/1/4      disable    -

**Table 1** Description of the display port split command output
Item	Description
Port	Port that can be split or merged.
Status	Current status of a split or merged interface: enable: Interface split is enabled. disable: Interface split is disabled. enable: Interface split is enabled after the device is reset. disable: Interface merge is enabled after the device is reset.
Split Port	Interfaces that have been split. If an interface is not split, this field displays as -. If an interface is split, converted interfaces are displayed.