display pppoe intermediate-agent information format

Function

The display pppoe intermediate-agent information format command displays formats of circuit ID and remote ID that are configured globally.

Format

display pppoe intermediate-agent information format

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After PPPoE+ is enabled globally, you can run the display pppoe intermediate-agent information format command to check whether the configuration of the circuit ID or remote ID added to PPPoE packets is correct.

Example

# Display formats of circuit ID and remote ID that are configured globally.

<HUAWEI> display pppoe intermediate-agent information format
 The current information format :
  Circuit ID : EXTEND
  Remote  ID : COMMON
 For example:
  interface GigabitEthernet0/0/1 SVLAN:200 CVLAN:100
  The PPPOE Intermediate Agent information is as follows:
  Circuit ID:00 04 00 c8 00 00
  Remote  ID:0022-0033-0044

**Table 1** Description of the **display pppoe intermediate-agent information format** command output
Item	Description
Circuit ID	Format of the circuit ID COMMON: indicates the standard fill format. EXTEND: indicates the extended fill format. USER DEFINE: indicates user-defined fill format. You can run the pppoe intermediate-agent information format command to set this parameter. If the portdescription keyword is specified in the user-defined circuit-id and no interface description is configured, the Circuit ID in For example displays portdescription.
Remote ID	Format of the remote ID COMMON: indicates the standard fill format. EXTEND: indicates the extended fill format. USER DEFINE: indicates user-defined fill format. You can run the pppoe intermediate-agent information format command to set this parameter. Remote IDs vary according to devices. If the portdescription keyword is specified in the user-defined remote-id and no interface description is configured, the Remote ID in For example displays portdescription.