display provision-ap parameter-list

Function

The display provision-ap parameter-list command displays AP provisioning parameters in the AP provisioning view.

Format

display provision-ap parameter-list

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Before running the commit command to deliver the AP provisioning parameters configured in the AP provisioning view, you can run the display provision-ap parameter-list command to check whether the parameters are correct and complete.

If a parameter is displayed as - in the command output, the parameter of the APs is not changed after the configuration is committed.

Example

# Display AP provisioning parameters in the AP provisioning view.

<HUAWEI> display provision-ap parameter-list
--------------------------------------------------------------------------------
AP mode              : -
AP name              : -
AP address mode      : -
IPv4 address         : -
IPv4 mask address    : -
IPv4 gateway address : -
IPv4 AC list         : -
Management Vlan      : 2  
--------------------------------------------------------------------------------

**Table 1** Description of the **display provision-ap parameter-list** command output
Item	Description
AP mode	AP mode. To set this parameter, run the ap-mode command.
AP name	AP name. To configure this parameter, run the ap-name (AP provisioning view) command.
AP address mode	Mode in which an AP obtains an IP address. To configure this parameter, run the address-mode (AP provisioning view) command.
IPv4 address	Static IPv4 address of an AP. To configure this parameter, run the ip-address (AP provisioning view) command.
IPv4 mask address	Static IPv4 address mask of an AP. To set this parameter, run the ip-address (AP provisioning view) command.
IPv4 gateway address	IPv4 address gateway of the AP. To configure this parameter, run the ip-address (AP provisioning view) command.
IPv4 AC list	AC IPv4 address list of an AP. To configure this parameter, run the ac-list (AP provisioning view) command.
Management Vlan	Management VLAN tag carried in CAPWAP packets sent from the AP's wired interface. To configure this parameter, run the management-vlan command.