display pw-template

Function

The display pw-template command displays information about PW templates.

Format

display pw-template [ pw-template-name ]

Parameters

Parameter	Description	Value
pw-template-name	Specifies the PW template name. If this parameter is not specified, information about all PW templates is displayed.	The value is an existing PW template name.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

If pw-template-name is not specified, information about all PW templates is displayed.

Example

# Display information about all PW templates.

<HUAWEI> display pw-template
Total PW template number : 2
  PW Template Name : PWT
  PeerIP           : 2.2.2.2
  Tnl Policy Name  : --
  CtrlWord         : Enable
  MTU              : 1500
  Max Atm Cells    : 28
  ATM Pack Overtime: 1000
  Seq-Number       : Disable
  Transmit ATM Cells      : 28
  TDM Encapsulation Number: 32
  Jitter-Buffer           : 20
  Jitter-Buffer-Cep       : 1125        
  Payload-Compression DBA : UNEQ       
  Idle-Code               : ff
  Rtp-Header              : Disable
  VCCV Capability  : cw alert ttl lsp-ping bfd
  Total PW         : 6, Static PW : 1, LDP PW : 5

  PW Template Name : pwt
  PeerIP           : --
  Tnl Policy Name  : --
  CtrlWord         : Disable
  MTU              : 1500
  Max Atm Cells    : 28
  ATM Pack Overtime: 1000
  Seq-Number       : Disable
  Transmit ATM Cells      : 28
  TDM Encapsulation Number: 32
  Jitter-Buffer           : 20
  Jitter-Buffer-Cep       : 1125        
  Payload-Compression DBA : UNEQ       
  Idle-Code               : ff
  Rtp-Header              : Disable
  VCCV Capability  : alert ttl lsp-ping bfd
  Total PW         : 0, Static PW : 0, LDP PW : 0

**Table 1** Description of the **display pw-template** command output
Item	Description
Total PW template number	Total number of PW templates.
PW Template Name	PW template name.
PeerIP	Peer IP address.
Tnl Policy Name	Name of the public network tunnel policy applied to the PW.
CtrlWord	Whether the control word is enabled in the PW template. Disable Enable
MTU	Maximum transmission unit.
Max ATM cells	Maximum number of transmitted ATM cells.
ATM pack overtime	Delay in packaging ATM cells.
Seq-Number	Sequence number in the control word of the PW: If the sequence number function is enabled, the device checks the sequence number of each packet and discards any packet with an incorrect sequence number. If the sequence number function is disabled, the device does not check the sequence number when processing packets.
Transmit ATM Cells	Number of ATM cells sent by the local device.
TDM Encapsulation Number	Number of encapsulated TDM frames.
Jitter-Buffer	Maximum jitter buffer depth for TDM.
Jitter-Buffer-Cep	Maximum jitter buffer depth for TDM (with CEP encapsulation).
Payload-Compression DBA	Payload compression dynamic bandwidth allocation (DBA): UNEQ: Send DBA packets when unequipped circuit indications are detected. --: Payload compression DBA is not configured.
Idle-Code	Idle code that is filled when a jitter buffer underflow occurs.
Rtp-Header	Whether the RTP header is added to the transparently transmitted TDM frame.
VCCV Capability	VC connection verification mode. By default, the VCCV type is alert ttl lsp-ping bfd, indicating that the control word function is disabled and LSP ping and BFD are supported for the alert channel. If the control word function is enabled, the VCCV type is cw alert ttl lsp-ping bfd, indicating that LSP ping and BFD are supported for both the control word channel and the alert channel.
Total PW	Total number of PWs using this PW template, including static and dynamic PWs.