display qos-profile

Function

The display qos-profile command displays the configured QoS profile information.

Format

display qos-profile [ name profile-name | all ]

Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.

Parameters

Parameter	Description	Value
name profile-name	Specifies the name of a QoS profile.	The value must the name of an existing QoS profile.
all	Indicates all QoS profiles.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

The display qos-profile command displays the configuration of a specified QoS profile or all QoS profiles. The command output helps you check the QoS profile configuration and locate QoS faults.

Example

# Display the configurations of all QoS profiles.

<HUAWEI> display qos-profile all
Qos-profile[0]: huawei                                                          
---------------------------------------------                                   
IcarConfiged:         0                                                         
IcarCir     :         0                                                         
IcarPir     :         0                                                         
IcarCbs     :         0                                                         
IcarPbs     :         0                                                         
EcarConfiged:         0                                                         
EcarCir     :         0                                                         
EcarPir     :         0                                                         
EcarCbs     :         0                                                         
EcarPbs     :         0                                                         
StatisiticEn:         1                                                         
Remark8021p :         0                                                         
8021pValue  :         0                                                         
RemarkDscp  :         0                                                         
DscpValue   :         0                                                         
---------------------------------------------

The display qos-profile command on the S5720-EI, S6720-EI, and S6720S-EI does not display IcarConfiged, IcarCir, IcarPir, IcarCbs, IcarPbs, Remark8021p, 8021pValue, RemarkDscp, or DscpValue.

**Table 1** Description of the **display qos-profile all** command output
Item	Description
Qos-profile[0]	Name of a QoS profile. The number in bracket is the index that the system assigns to the QoS profile. To create a QoS profile, run the qos-profile command.
IcarConfiged	Whether inbound traffic policing is configured: 0: Inbound traffic policing is not configured. 1: Inbound traffic policing is configured. To configure inbound traffic policing in a QoS profile, run the car (QoS profile view) command.
IcarCir	CIR in the inbound direction. To change the value, run the car (QoS profile view) command.
IcarPir	PIR in the inbound direction. To change the value, run the car (QoS profile view) command.
IcarCbs	CBS in the inbound direction. To change the value, run the car (QoS profile view) command.
IcarPbs	PBS in the inbound direction. To change the value, run the car (QoS profile view) command.
EcarConfiged	Whether outbound traffic policing is configured: 0: Outbound traffic policing is not configured. 1: Outbound traffic policing is configured. To configure outbound traffic policing in a QoS profile, run the car (QoS profile view) command.
EcarCir	CIR in the outbound direction. To change the value, run the car (QoS profile view) command.
EcarPir	PIR in the outbound direction. To change the value, run the car (QoS profile view) command.
EcarCbs	CBS in the outbound direction. To change the value, run the car (QoS profile view) command.
EcarPbs	PBS in the outbound direction. To change the value, run the car (QoS profile view) command.
StatisiticEn	Whether the traffic statistics function is configured: 0: The traffic statistics function is not configured. 1: The traffic statistics function is configured. To configure the traffic statistics function in a QoS profile, run the statistic enable (QoS profile view) command.
Remark8021p	Whether 802.1p priority re-marking is configured: 0: 802.1p priority re-marking is not configured. 1: 802.1p priority re-marking is configured. To configure 802.1p priority re-marking in a QoS profile, run the remark 8021p (QoS profile view) command.
8021pValue	Re-marked 802.1p priority. To change the value, run the remark 8021p (QoS profile view) command.
RemarkDscp	Whether DSCP priority re-marking is configured: 0: DSCP priority re-marking is not configured. 1: DSCP priority re-marking is configured. To configure DSCP priority re-marking in a QoS profile, run the remark dscp (QoS profile view) command.
DscpValue	Re-marked DSCP priority. To change the value, run the remark dscp (QoS profile view) command.

# Display the summary configurations of all QoS profiles.

<HUAWEI> display qos-profile
        index                    qos-profile name                               
-----------------------------------------------------------------               
        0                        huawei                                         
-----------------------------------------------------------------               
 Total   64     Used   1

**Table 2** Description of the **display qos-profile** command output
Item	Description
index	Index that the system assigns to a QoS profile.
qos-profile name	Name of a QoS profile.
Total	Maximum number of QoS profiles that can be configured.
Used	Number of used QoS profiles.