display qos micro-burst status all

Function

The display qos micro-burst status all command displays information about all interfaces enabled with microburst detection and packet loss information on the interfaces.

Only the S5730-HI, S5731-H, S5731-S, S5731S-S, S5731S-H, S5732-H, S6720-HI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.

Format

display qos micro-burst status all [ slot slot-id ]

Parameters

Parameter	Description	Value
slot slot-id	Specifies a slot ID.	The value must be set according to the device configuration.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

You can run the display qos micro-burst status all [ slot slot-id ] command to view information about all interfaces enabled with microburst detection and packet loss information on the interfaces.

Prerequisites

The microburst detection function has been enabled on the switch by running the qos micro-burst detection [ enhanced ] enable slot slot-id command in the system view.
The microburst detection function has been enabled on an interface by running the qos micro-burst detection enable command in the interface view.

Example

# In default microburst detection mode, display all interfaces enabled with microburst detection and packet loss information on the interfaces.

<HUAWEI> system-view
[HUAWEI] qos micro-burst detection enable slot 0
[HUAWEI] interface gigabitEthernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] qos micro-burst detection enable
[HUAWEI-GigabitEthernet0/0/1] quit
<HUAWEI> display qos micro-burst status all                                                                                         
Slot 0                   Mode:default(5ms)                                                                                          
-------------------------------------------                                                                                         
Interface                Discard(Packets)                                                                                           
-------------------------------------------                                                                                         
GigabitEthernet0/0/1                    0

**Table 1** Description of the **display qos micro-burst status all** command output
Item	Description
Slot	ID of a slot enabled with microburst detection.
Mode	Microburst detection mode: default(5ms): In default mode, the packet sampling interval is 5 ms. enhanced(1ms): In enhanced mode, the packet sampling interval is 1 ms.
Interface	Interface enabled with microburst detection.
Discard(Packets)	Number of discarded packets.