display references mesh-profile

Function

The display references mesh-profile command displays reference information about a Mesh profile.

Format

display references mesh-profile name profile-name

Parameters

Parameter	Description	Value
name profile-name	Specifies the name of a Mesh profile.	The Mesh profile must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display references mesh-profile command to check reference information about a Mesh profile.

Example

# Display reference information about the Mesh profile test.

<HUAWEI> display references mesh-profile name test
--------------------------------------------------------------------------------
Reference type     Reference name                       Reference radio  WLAN ID
--------------------------------------------------------------------------------
AP group           test1                                Radio-0          16     
--------------------------------------------------------------------------------
Total: 1

**Table 1** Description of the **display references mesh-profile** command output
Item	Description
Reference type	Type of the profile to which the Mesh profile is bound.
Reference name	Name of the profile to which the Mesh profile is bound. Run the mesh-profile radio command in the AP group view or view of the AP with a specified ID to apply a Mesh profile. Run the mesh-profile (AP group radio view or AP radio view) command in the AP group radio view to apply a Mesh profile.
Reference radio	AP radio to which a Mesh profile is applied.
WLAN ID	WLAN ID to which a Mesh profile is bound.