display regulatory-domain-profile

Function

The display regulatory-domain-profile command displays configuration and reference information about a regulatory domain profile.

Format

display regulatory-domain-profile { all | name profile-name }

Parameters

Parameter	Description	Value
all	Displays information about all regulatory domain profiles.	-
name profile-name	Displays information about a specified regulatory domain profile.	The regulatory domain profile must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display regulatory-domain-profile command to view configuration and reference information about a regulatory domain profile.

Example

# Display information about all regulatory profiles.

<HUAWEI> display regulatory-domain-profile all
------------------------------------------------------------
Profile name        Reference
------------------------------------------------------------
default             6
------------------------------------------------------------
Total: 1

**Table 1** Description of the **display regulatory-domain-profile all** command output
Item	Description
Profile name	Regulatory domain profile name.
Reference	Number of times a regulatory domain profile is referenced.

# Display information about the regulatory domain profile default.

<HUAWEI> display regulatory-domain-profile name default
------------------------------------------------------------
Profile name          : default
Country code          : CN
2.4G dca channel-set  : 1,6,11
5G dca bandwidth      : 20mhz
5G dca channel-set    : 149,153,157,161,165
Wideband switch       : enable
Channel load mode     : outdoor
------------------------------------------------------------

**Table 2** Description of the **display regulatory-domain-profile name** command output
Item	Description
Profile name	Regulatory domain profile name.
Country code	Country code. To configure the parameter, run the country-code command.
2.4G dca channel-set	2.4G radio calibration channel set. To configure the parameter, run the dca-channel channel-set command.
5G dca bandwidth	5G radio calibration bandwidth. To configure the parameter, run the dca-channel bandwidth command.
5G dca channel-set	5G radio calibration channel set. To configure the parameter, run the dca-channel channel-set command.
Wideband switch	Indicates whether the wideband function, that is, the 4.9 GHz frequency band, of the regulatory domain profile is enabled. enable: The wideband function is enabled. disable: The wideband function is disabled. To configure this parameter, run the wideband enable command.
Channel load mode	Channel load mode. outdoor: outdoor mode indoor: indoor mode To configure this parameter, run the channel-load-mode indoor command.