display rrm-profile

Function

The display rrm-profile command displays information about RRM profiles.

Format

display rrm-profile { all | name profile-name }

Parameters

Parameter	Description	Value
all	Displays information about all RRM profiles.	-
name profile-name	Displays information about a specified RRM profile.	The RRM profile name must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view information about RRM profiles.

Example

# Display information about all RRM profiles.

<HUAWEI> display rrm-profile all
------------------------------------------------------------
Profile name  Reference
------------------------------------------------------------
default       2
------------------------------------------------------------
Total:1

**Table 1** Description of the **display rrm-profile all** command output
Item	Description
Profile name	Name of an RRM profile.
Reference	Number of times an RRM profile is referenced.

# Display information about the RRM profile huawei.

<HUAWEI> display rrm-profile name huawei
--------------------------------------------------------------------            
Retransmission rate threshold for trigger channel/power select(%)  : 55
Noise-floor threshold for trigger channel/power select(dBm)  : -75              
Calibrate tpc threshold(dBm):                                : -60              
Calibrate maximum TX power(dBm)                              : 127              
Calibrate minimum TX power(dBm)                              : 9                
Calibrate retransmission rate check interval(min)            : 1
Calibrate retransmission rate check traffic threshold(kbps)  : 1250
Airtime fairness schedule                                    : disable          
Dynamic adjust EDCA parameter                                : disable          
Dynamic EDCA be-service threshold                            : 6 
UAC check client's SNR                                       : disable          
UAC client's SNR threshold(dB)                               : 20               
UAC check client number                                      : disable          
UAC client number access threshold                           : 64               
UAC client number roam threshold                             : 64               
Action upon reaching the UAC threshold                       : SSID broadcast 
Band steer deny threshold                                    : 0                
Band steer SNR threshold(dB)                                 : 20               
Band balance start threshold                                 : 100              
Band balance gap threshold(%)                                : 20               
Client's band expire based on continuous probe counts        : 35               
Station load balance                                         : disable          
Station load balance mode                                    : sta-number       
Station load balance RSSI threshold(dBm)                     : -70              
Station load balance RSSI-diff-gap threshold(dBm)            : 20 
Station load balance sta-number start threshold              : 10               
Station load balance sta-number gap threshold(percentage)    : 20               
Station load balance sta-number gap threshold(number)        : -                
Station load balance deauth fail times                       : 2                
Station load balance BTM fail times                          : 5                
Station load balance steer-restrict restrict time(s)         : 5                
Station load balance steer-restrict probe threshold          : 5                
Station load balance steer-restrict auth  threshold          : 0                
Station load balance probe-report interval(s)                : 30      
BSS color switch                                             : enable
Spatial reuse switch                                         : enable
Smart-roam                                                   : enable           
Smart-roam quick kickoff                                     : enable           
Smart-roam check SNR                                         : enable           
Smart-roam quick kickoff check SNR                           : enable           
Smart-roam check rate                                        : disable          
Smart-roam quick kickoff check rate                          : disable          
Smart-roam standing SNR threshold(dB)                        : 20               
Smart-roam SNR quick-kickoff-threshold(dB)                   : 15               
Smart-roam rate threshold(%)                                 : 20               
Smart-roam rate quick-kickoff-threshold(%)                   : 20               
Smart-roam high level SNR margin(dB)                         : 15               
Smart-roam low level SNR margin(dB)                          : 6                
Smart-roam SNR check interval(s)                             : 3                
Smart-roam unable roam client expire time(min)               : 120              
Smart-roam quick-kickoff SNR check interval(ms)              : 500              
Smart-roam quick-kickoff SNR P-N observe time                : 6                
Smart-roam quick-kickoff SNR P-N qualify time                : 4                
Smart-roam advanced scan                                     : enable           
Smart-roam quick-kickoff back off time                       : 60               
TPC request switch                                           : disable
Link measurement switch                                      : enable
AMC policy                                                   : auto-balance     
High density AMC optimize                                    : disable          
SFN roam check high threshold(dBm)                           : -55              
SFN roam check low threshold(dBm)                            : -60              
SFN roam check interval(ms)                                  : 700              
SFN roam report interval(ms)                                 : 400              
SFN roam check rssi-accumulate threshold(dB)                 : 8                
SFN roam check sta-holding times                             : 3                
SFN roam check gap-rssi(dB)                                  : 6                
SFN roam check better-times                                  : 2                
DFS smart select                                             : enable           
DFS recover delay time(min)                                  : 0                
Multimedia air optimize                                      : disable
Multimedia air optimize threshold
  Voice                                                      : 30
  Video                                                      : 100
--------------------------------------------------------------------

**Table 2** Description of the **display rrm-profile name** command output
Item	Description
Retransmission rate threshold for trigger channel/power select(%)	Retransmission rate threshold for triggering channel or power adjustment. To configure this parameter, run the calibrate retransmission-rate-threshold command.
Noise-floor threshold for trigger channel/power select(dBm)	Noise-floor threshold for triggering channel or power adjustment. To configure this parameter, run the calibrate noise-floor-threshold command.
Calibrate tpc threshold(dBm)	Transmit Power Control (TPC) coverage threshold. To configure this parameter, run the calibrate tpc threshold command.
Calibrate maximum TX power(dBm)	Maximum transmit power that can be adjusted through radio calibration. To configure this parameter, run the calibrate max-tx-power command.
Calibrate minimum TX power(dBm)	Minimum transmit power that can be adjusted through radio calibration. To configure this parameter, run the calibrate min-tx-power command.
Calibrate retransmission rate check interval(min)	Interval for checking the retransmission rate. To configure this parameter, run the calibrate retransmission-rate-check command.
Calibrate retransmission rate check traffic threshold(kbps)	Traffic threshold for checking the retransmission rate. To configure this parameter, run the calibrate retransmission-rate-check command.
Airtime fairness schedule	Whether to enable airtime fair scheduling. To configure this parameter, run the airtime-fair-schedule enable command.
Dynamic adjust EDCA parameter	Whether to enable dynamic EDCA parameter adjustment. To configure this parameter, run the dynamic-edca enable command.
Dynamic EDCA be-service threshold	Threshold for the dynamic EDCA Best-Effort service. To configure this parameter, run the dynamic-edca threshold command.
UAC check client's SNR	Whether to enable user CAC based on the terminal SNR. To configure this parameter, run the uac enable command.
UAC client's SNR threshold(dB)	User CAC SNR threshold. To configure this parameter, run the uac client-snr threshold command.
UAC check client number	Whether to enable user CAC based on the number of users. To configure this parameter, run the uac enable command.
UAC client number access threshold	User CAC access threshold based on the number of users. To configure this parameter, run the uac client-number threshold command.
UAC client number roam threshold	User CAC roaming threshold based on the number of users. To configure this parameter, run the uac client-number threshold command.
Action upon reaching the UAC threshold	Action to take when the number of access users reaches the user CAC threshold. SSID hide: hiding the SSID SSID broadcast: broadcasting the SSID priority-based STA replacement: allowing access of VIP users instead of non-VIP users based on priorities To configure this parameter, run the uac reach-access-threshold command.
Band steer deny threshold	Maximum number of times an AP rejects association requests of a STA for band steering. To configure this parameter, run the band-steer deny-threshold command.
Band steer SNR threshold(dB)	Start SNR threshold for triggering 5G-prior access. To configure this parameter, run the band-steer snr-threshold command.
Band balance start threshold	Start threshold for load balancing between radios. To configure this parameter, run the band-steer balance start-threshold command.
Band balance gap threshold(%)	Load difference threshold for load balancing between radios. To configure this parameter, run the band-steer balance gap-threshold command.
Client's band expire based on continuous probe counts	Aging condition of terminal band information, that is, the number of times that an AP has continuously received Probe frames of a terminal from the same frequency band. To configure this parameter, run the band-steer client-band-expire command.
Station load balance	Whether to enable the load balancing function. To configure this parameter, run the sta-load-balance dynamic disable command.
Station load balance mode	Dynamic load balancing mode. sta-number: dynamic load balancing based on the number of users
Station load balance RSSI threshold(dBm)	RSSI threshold of members in a dynamic load balancing group. To configure this parameter, run the sta-load-balance dynamic rssi-threshold command.
Station load balance RSSI-diff-gap threshold(dBm)	RSSI difference threshold for members in a static load balancing group. To configure this parameter, run the rssi-diff-gap command.
Station load balance sta-number start threshold	Start threshold for dynamic load balancing based on the number of users. To configure this parameter, run the sta-load-balance dynamic sta-number start-threshold command.
Station load balance sta-number gap threshold(percentage)	Load difference threshold for dynamic load balancing based on the percentage of users. To configure this parameter, run the sta-load-balance dynamic sta-number gap-threshold command.
Station load balance sta-number gap threshold(number)	Load difference threshold for dynamic load balancing based on the number of users. To configure this parameter, run the sta-load-balance dynamic sta-number gap-threshold command.
Station load balance deauth fail times	Maximum number of attempts to steer STAs in deauthentication mode. To configure this parameter, run the sta-load-balance dynamic deauth-fail-times command.
Station load balance BTM fail times	Maximum number of attempts to steer STAs in BTM mode. To configure this parameter, run the sta-load-balance dynamic btm-fail-times command.
Station load balance steer-restrict restrict time(s)	Duration within which non-target APs suppress association of STAs during STA steering. To configure this parameter, run the sta-load-balance dynamic steer-restrict restrict-time command.
Station load balance steer-restrict probe threshold	Maximum number of times non-target APs perform probe suppression for STAs during STA steering. To configure this parameter, run the sta-load-balance dynamic steer-restrict probe-threshold command.
Station load balance steer-restrict auth threshold	Maximum number of times non-target APs suppress authentication of STAs during STA steering. To configure this parameter, run the sta-load-balance dynamic steer-restrict auth-threshold command.
Station load balance probe-report interval(s)	Interval for reporting Probe frames. To configure this parameter, run the sta-load-balance dynamic probe-report interval command.
BSS color switch	Whether to enable the BSS coloring function. To configure this parameter, run the bss-color disable command.
Spatial reuse switch	Whether to enable the spatial reuse (SR) function. To configure this parameter, run the spatial-reuse disable command.
Smart-roam	Whether to enable smart roaming. To configure this parameter, run the smart-roam disable command.
Smart-roam quick kickoff	Whether to enable the function of quickly disconnecting STAs. To configure this parameter, run the smart-roam quick-kickoff-threshold disable command.
Smart-roam check SNR	Whether to specify the trigger mode of smart roaming as check SNR. To configure this parameter, run the smart-roam roam-threshold { check-snr \| check-rate } command.
Smart-roam quick kickoff check SNR	Whether to enable the function of quickly disconnecting STAs is triggered by checking the SNR of STAs. To configure this parameter, run the smart-roam quick-kickoff-threshold { check-snr \| check-rate } command.
Smart-roam check rate	Whether to specify the trigger mode of smart roaming as check rate. To configure this parameter, run the smart-roam roam-threshold { check-snr \| check-rate } command.
Smart-roam quick kickoff check rate	Whether to enable the function of quickly disconnecting STAs is triggered by checking the rate of STAs. To configure this parameter, run the smart-roam quick-kickoff-threshold { check-snr \| check-rate } command.
Smart-roam standing SNR threshold(dB)	SNR threshold for smart roaming. To configure this parameter, run the smart-roam roam-threshold { snr \| rate } command.
Smart-roam SNR quick-kickoff-threshold(dB)	SNR-based threshold for quickly disconnecting STAs. To configure this parameter, run the smart-roam quick-kickoff-threshold command.
Smart-roam rate threshold(%)	Rate threshold for smart roaming. To configure this parameter, run the smart-roam roam-threshold { snr \| rate } command.
Smart-roam rate quick-kickoff-threshold(%)	Rate-based threshold for quickly disconnecting STAs. To configure this parameter, run the smart-roam quick-kickoff-threshold command.
Smart-roam high level SNR margin(dB)	Higher SNR difference threshold that triggers STA roaming. To configure this parameter, run the smart-roam snr-margin command.
Smart-roam low level SNR margin(dB)	Lower SNR difference threshold that triggers STA roaming. To configure this parameter, run the smart-roam snr-margin command.
Smart-roam SNR check interval(s)	Terminal SNR check interval. To configure this parameter, run the smart-roam quick-kickoff-snr check-interval command.
Smart-roam unable roam client expire time(min)	Aging time of "unable to roam" record. To configure this parameter, run the smart-roam unable-roam-client expire-time command.
Smart-roam quick-kickoff SNR check interval(ms)	Interval for checking the SNR to determine whether to quickly disconnect STAs. To configure this parameter, run the smart-roam quick-kickoff-snr check-interval command.
Smart-roam quick-kickoff SNR P-N observe time	Number of PN observation times to determine whether to quickly disconnect STAs. To configure this parameter, run the smart-roam quick-kickoff-snr p-n criteria command.
Smart-roam quick-kickoff SNR P-N qualify time	Number of PN observation times to determine whether to quickly disconnect STAs. To configure this parameter, run the smart-roam quick-kickoff-snr p-n criteria command.
Smart-roam advanced scan	Whether coordinated scanning function of smart roaming is enabled. To configure this parameter, run the smart-roam advanced-scan disable command.
Smart-roam quick-kickoff back off time	Backoff time for quickly disconnecting STAs. To configure this parameter, run the smart-roam quick-kickoff back-off-time command.
TPC request switch	Whether TPC measurement is enabled. To configure this parameter, run the tpc report enable command.
Link measurement switch	Whether LM measurement is enabled. To configure this parameter, run the link measurement disable command.
AMC policy	Adaptive modulation and coding (AMC) algorithm. To configure this parameter, run the amc-policy command.
High density AMC optimize	Whether to enable the AMC optimization function in high-density scenarios. To configure this parameter, run the high-density amc-optimize enable command.
SFN roam check high threshold(dBm)	Upper RSSI threshold for agile distributed SFN roaming. To configure this parameter, run the sfn-roam roam-check high-threshold command.
SFN roam check low threshold(dBm)	Lower RSSI threshold for agile distributed SFN roaming. To configure this parameter, run the sfn-roam roam-check low-threshold command.
SFN roam check interval(ms)	Decision period for agile distributed SFN roaming. To configure this parameter, run the sfn-roam roam-check check-interval command.
SFN roam report interval(ms)	Interval for RUs to report the STA RSSI. To configure this parameter, run the sfn-roam report-interval command.
SFN roam check rssi-accumulate threshold(dB)	Cumulative RSSI change threshold for agile distributed SFN roaming. To configure this parameter, run the sfn-roam roam-check rssi-accumulate command.
SFN roam check sta-holding times	Number of STA holding times for agile distributed SFN roaming. To configure this parameter, run the sfn-roam roam-check sta-holding times command.
SFN roam check gap-rssi(dB)	RSSI gap for agile distributed SFN roaming RUs. To configure this parameter, run the sfn-roam roam-check gap-rssi command.
SFN roam check better-times	Number of times the RSSI of agile distributed SFN roaming RUs is higher than that of the local RU. To configure this parameter, run the sfn-roam roam-check better-times command.
DFS smart select	Whether to enable DFS smart selection. enable: DFS smart selection is enabled. disable: DFS smart selection is disabled. To configure this parameter, run the dfs smart-selection disable command.
DFS recover delay time(min)	Delay in switching back the DFS channel. To configure this parameter, run the dfs recover-delay command.
Multimedia air optimize	Whether the multimedia air interface optimization function is enabled. disable: This function is disabled. enable: This function is enabled. To configure this parameter, run the multimedia-air-optimize enable command.
Multimedia air optimize threshold	User packet density threshold for triggering multimedia air interface optimization. Voice: voice packet density threshold Video: video packet density threshold To configure this parameter, run the multimedia-air-optimize threshold command.