display rrpp ring-group

Function

The display rrpp ring-group command displays the configuration about an RRPP ring group.

Format

display rrpp ring-group [ ring-group-id ]

Parameters

Parameter	Description	Value
ring-group ring-group-id	Specifies the ID of an RRPP ring group. If this parameter is not specified, configurations about all the RRPP ring groups are displayed.	The value is an integer that ranges from 1 to 16.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

You can run the display rrpp ring-group command on an RRPP-enabled device to view configurations about RRPP ring groups and learn their running status.

Precautions

If the RRPP-enabled device is an edge node, the ring that sends Edge-Hello packets is displayed.

If the RRPP-enabled device is an assistant edge node, the ring that receives Edge-Hello packets is displayed.

Example

# Display configurations about all ring groups.

<HUAWEI> display rrpp ring-group

 Ring Group 1:
 domain 1 ring 1 to 3, 5
 domain 2 ring 1 to 3, 5
 domain 1 ring 1 send Edge-Hello packet

 Ring Group 2:
 domain 1 ring 4, 6 to 7
 domain 2 ring 4, 6 to 7

# Check the configuration about Ring Group 2.

<HUAWEI> display rrpp ring-group 2

 Ring Group 2:
 domain 1 ring 4, 6 to 7
 domain 2 ring 4, 6 to 7

**Table 1** Description of the display rrpp ring-group command output
Item	Description
Ring Group	ID of the RRPP ring group. To specify the parameter, run the rrpp ring-group command.
domain xx ring xx	Sub-rings in the ring group. To specify sub-rings in a ring group, run the domain command.
domain xx ring xx send Edge-Hello packet	Sub-ring that sends Edge Hello packets in the RRPP ring group.