display service-scheme

Function

The display service-scheme command displays the configuration of service schemes.

Format

display service-scheme [ name name ]

Parameters

Parameter	Description	Value
name name	Specifies the name of a service scheme.	The service scheme must already exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

The display service-scheme command displays the configuration of service schemes.

Before applying a service scheme to a domain, run the display service-scheme command to check whether the service scheme is correct.

Precautions

The display service-scheme command displays the detailed configuration if the command is executed in the service scheme view or the name of a service scheme is specified. Otherwise, this command displays only the summary of service schemes.

Example

# Display information about all service schemes.

<HUAWEI> display service-scheme
  -------------------------------------------------------------------
  service-scheme-name                    scheme-index
  -------------------------------------------------------------------
  svcscheme1                               0
  svcscheme2                               1
  -------------------------------------------------------------------
  Total of service scheme: 2

# Display the configuration of the service scheme svcscheme1.

<HUAWEI> display service-scheme name svcscheme1
                                                                                
  service-scheme-name           : svcscheme1                                     
  service-scheme-primary-dns    : -                                              
  service-scheme-secondary-dns  : -                                              
  service-scheme-adminlevel     : 15
  service-scheme-uclgroup-ID    : 10
  service-scheme-uclgroup-name  : u1
  service-scheme-acl-id         : 3001 
  service-scheme-ipv6-acl-id    : 3001 
  service-scheme-redirect-acl-id: 3001 
  service-scheme-vlan           : 10
  service-scheme-priority       : 0
  service-scheme-voicevlan      : enable
  access-limit-username-maxnum  : 10  
  service-scheme-qosprofile     : -
  servive-scheme-sacprofile     : -
  service-scheme-idlecut-time   : 10                    
  service-scheme-idlecut-flow   : 20  
  service-scheme-idlecut-direct : Inbound and Outbound

**Table 1** Description of the **display service-scheme** command output
Item	Description
service-scheme-name	Name of a service scheme. To create a service scheme, run the service-scheme (AAA view) command.
scheme-index	Index of a service scheme.
service-scheme-primary-dns	Address of the primary DNS server. To configure this item, run the dns command.
service-scheme-secondary-dns	Address of the secondary DNS server. To configure this item, run the dns command.
service-scheme-adminlevel	Level of an administrator. To configure this item, run the admin-user privilege level command.
service-scheme-uclgroup-ID	Index of the bound UCL group. To configure this item, run the ucl-group command.
service-scheme-uclgroup-name	Name of the bound UCL group. To configure this item, run the ucl-group command.
service-scheme-acl-id	Bound ACL number. To configure this item, run the acl-id command.
service-scheme-ipv6-acl-id	Bound IPv6 ACL number. To configure this item, run the acl-id command.
service-scheme-redirect-acl-id	Number of the ACL used for redirection in the service scheme. To configure this item, run the redirect-acl command.
service-scheme-vlan	User VLAN ID. To configure this item, run the user-vlan command.
service-scheme-priority	User priority in the service scheme. To configure this item, run the priority command.
service-scheme-voicevlan	Whether voice VLAN is enabled. To configure this item, run the voice-vlan command.
access-limit-username-maxnum	Maximum number of users who are allowed to access the network using the same user name. To configure this item, run the access-limit user-name max-num command.
service-scheme-qosprofile	Name of the bound QoS profile. To configure this item, run the qos-profile command.
service-scheme-sacprofile	Name of the bound SAC profile. To configure this item, run the sac-profile (service scheme view) command.
service-scheme-idlecut-time	Idle-cut timeout interval, in minutes. To configure this item, run the idle-cut command.
service-scheme-idlecut-flow	Threshold for idle-cut traffic, in kbytes. To configure this item, run the idle-cut command.
service-scheme-idlecut-direct	Direction in which idle-cut takes effect for traffic: Inbound: Idle-cut takes effect for uplink traffic. Outbound: Idle-cut takes effect for downlink traffic. Inbound and Outbound: Idle-cut takes effect for uplink and downlink traffic. To configure this item, run the idle-cut command.