display snmp-agent community

Function

The display snmp-agent community command displays the configured community name.

Format

display snmp-agent community [ read | write ] ^*

Parameters

Parameter	Description	Value
read	Displays the name of a community with read-only permission.	-
write	Displays the name of a community with read and write permission.	-

Views

All views

Default Level

3: Management level

Usage Guidelines

When configuring a management entity, you can use the display snmp-agent community command to check the community name configured on the current agent.

If the parameter read or write is not specified, the names of all communities are displayed.

You have to configure the community name using the snmp-agent community command before you run the display snmp-agent community command.

Example

# Display the current community name.

<HUAWEI> display snmp-agent community
   Community name: %^%#.T|&Whvyf$<Gd"I,wXi5SP_6~Nakk6<<+3H:N-h@aJ6d,l0md%HCeAY8~>X=>xV\JKNAL=124r839v<*%^%#
       Group name: %^%#.T|&Whvyf$<Gd"I,wXi5SP_6~Nakk6<<+3H:N-h@aJ6d,l0md%HCeAY8~>X=>xV\JKNAL=124r839v<*%^%#
       Alias name:huawei
       Acl:2001
       Storage type: nonVolatile

**Table 1** Description of the **display snmp-agent community** command output
Item	Description
Community name	Name of a community.
Group name	Name of a group.
Alias name	Alias name for a community
Acl	The ACL takes effect on both IPv4 and IPv6 networks.
Ipv4 acl	The ACL takes effect on only IPv4 network.
Ipv6 acl	The ACL takes effect on only IPv6 network.
Storage type	Mode in which information is stored. Only nonVolatile is supported currently. In this mode, configuration can be restored after the device restarts.