display snmp-agent trap feature-name acle all

Function

The display snmp-agent trap feature-name acle all command displays the status of all traps on the ACL module.

Format

display snmp-agent trap feature-name acle all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After the trap function of a specified feature is enabled, you can run the display snmp-agent trap feature-name acle all command to check the status of all traps of ACL. You can use the snmp-agent trap enable feature-name acle command to enable the trap function of ACL.

Prerequisites

SNMP has been enabled. See snmp-agent.

Example

# Display all the traps of the ACL module.

<HUAWEI>display snmp-agent trap feature-name acle all
------------------------------------------------------------------------------
Feature name: ACLE
Trap number : 4
------------------------------------------------------------------------------
Trap name                       Default switch status   Current switch status
hwAclResTotalCountExceedTrap    on                      on
hwAclResTotalCountExceedClearTrap
                                on                      on
hwAclResThresholdExceedTrap     on                      on
hwAclResThresholdExceedClearTrap
                                on                      on

**Table 1** Description of the **display snmp-agent trap feature-name acle all** command output
Item	Description
Feature name	Name of the module that the trap belongs to.
Trap number	Number of traps.
Trap name	Trap name. Traps of the ACL module include: hwAclResTotalCountExceedTrap: indicates the Huawei proprietary trap sent when the ACL resource usage on the device reaches 100%. hwAclResTotalCountExceedClearTrap: indicates the Huawei proprietary trap sent when the ACL resource usage on the device reaches 100%, and then falls below 100% and stays below 100% for a period of time. hwAclResThresholdExceedTrap: indicates the Huawei proprietary trap sent when the ACL resource usage on the device exceeds the upper alarm threshold (percentage). hwAclResThresholdExceedClearTrap: indicates the Huawei proprietary trap sent when the ACL resource usage on the device falls below the lower alarm threshold (percentage).
Default switch status	Default status of the trap function: on: indicates that the trap function is enabled by default. off: indicates that the trap function is disabled by default.
Current switch status	Status of the trap function: on: indicates that the trap function is enabled. off: indicates that the trap function is disabled.