display snmp-agent trap feature-name emdi all

Function

The display snmp-agent trap feature-name emdi all command displays whether the switch is enabled to send traps of eMDI module to the NMS.

Format

display snmp-agent trap feature-name emdi all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After running the snmp-agent trap enable feature-name emdi command to enable the function of sending traps of eMDI modules to the NMS, you can run the display snmp-agent trap feature-name emdi all command to check whether this function is enabled.

Prerequisites

SNMP has been enabled. For details, see snmp-agent.

Example

# Display whether the switch is enabled to send traps of eMDI module to the NMS.

<HUAWEI> display snmp-agent trap feature-name emdi all
------------------------------------------------------------------------------                                                      
Feature name: EMDI                                                                                                                  
Trap number : 4                                                                                                                     
------------------------------------------------------------------------------                                                      
Trap name                       Default switch status   Current switch status                                                       
hwEMDIIndicatorOverThreshold    on                      on                                                                          
hwEMDIIndicatorOverThresholdResume                                                                                                  
                                on                      on                                                                          
hwEMDIReceiveDuplicatePackets   on                      on                                                                          
hwEMDIReceiveDuplicatePacketsResume                                                                                                 
                                on                      on

**Table 1** Description of the **display snmp-agent trap feature-name emdi all** command output
Item	Description
Feature name	Name of the feature that generates traps.
Trap number	Number of traps generated by IP FPM module.
Trap name	Name of the trap. Traps of the IP FPM module include: hwIpfpmLossRatioExceed: A monitoring indicator detected by an eMDI instance exceeded the alarm threshold in three consecutive monitoring intervals. hwIpfpmLossRatioRecovery: A monitoring indicator detected by an eMDI instance fell below the alarm threshold in 60 consecutive monitoring intervals. hwIpfpmTlpExceed: The out-of-order packet rate detected by an eMDI instance was greater than the packet loss rate in three consecutive monitoring intervals. hwIpfpmTlpRecovery: The out-of-order packet rate detected by an eMDI instance was less than the packet loss rate in 60 consecutive monitoring intervals.
Default switch status	Default status of a trap: on: The switch is enabled to send this trap to the NMS. off: The switch is disabled to send this trap to the NMS.
Current switch status	Current status of a trap: on: The switch is enabled to send this trap to the NMS. off: The switch is disabled to send this trap to the NMS. This status can be configured using the snmp-agent trap enable feature-name emdi command.