display snmp-agent trap feature-name ifpdt all

Function

The display snmp-agent trap feature-name ifpdt all command displays all trap messages of the IFPDT module.

Format

display snmp-agent trap feature-name ifpdt all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The Simple Network Management Protocol (SNMP) is a standard network management protocol widely used on TCP/IP networks. It uses a central computer (a network management station) that runs network management software to manage network elements. The management agent on the network element automatically reports traps to the network management station. Then, the network administrator immediately takes measures to resolve the problem.

The display snmp-agent trap feature-name ifpdt all command displays whether all trap functions of the IFPDT module are enabled.

Example

# Display all trap messages of the IFPDT module.

<HUAWEI> display snmp-agent trap feature-name ifpdt all
------------------------------------------------------------------------------                                                      
Feature name: IFPDT                                                                                                                 
Trap number : 22                                                                                                                    
------------------------------------------------------------------------------                                                      
Trap name                       Default switch status   Current switch status                                                       
hwPortNoSupportOETrap           on                      on                                                                          
hwTrunkMemSpeedDifferentAlarm   off                     on                                                                          
hwTrunkMemSpeedDifferentResume  off                     on                                                                          
hwPhysicalPortInBroadcastRapidChange                                                                                                
                                on                      on                                                                          
hwSubIfNumExceededSpecAlarm     on                      on                                                                          
hwSubIfNumExceededSpecAlarmResume                                                                                                   
                                on                      on                                                                          
hwInputRateChangeOverThresholdNotice                                                                                                
                                on                      on                                                                          
hwOutputRateChangeOverThresholdNotice                                                                                               
                                on                      on                                                                          
hwPortProtectGroupUnavailable   on                      on                                                                          
hwPortProtectGroupAvailable     on                      on                                                                          
hwPortProtectGroupDelete        on                      on                                                                          
hwCableSnrAbnormal              on                      on                                                                          
hwCableSnrNormal                on                      on                                                                          
hwCableSnrDetectNotSupport      on                      on                                                                          
hwVxlanTrunkHashNotSupport      on                      on                                                                          
hwPortLRMStateAbnormal          on                      on                                                                          
hwTrunkUUHashRisk               on                      on                                                                          
hwPhysicalPortCrcRatioExceed    on                      on                                                                          
hwPhysicalPortCrcRatioResume    on                      on                                                                          
hwInputDiscardNotice            on                      on                                                                          
hwOutputDiscardNotice           on                      on                                                                          
hwTunnelIfNumExceededSpecAlarm  on                      on

**Table 1** Description of the **display snmp-agent trap feature-name ifpdt all** command output
Item	Description
Feature name	Name of the module to which a trap message belongs.
Trap number	Number of trap messages.
Trap name	Name of a trap message of the IFPDT module: hwPortNoSupportOETrap: The stack interface is connected to the copper transceiver module or GE optical module. hwTrunkMemSpeedDifferentAlarm: The rates of active interfaces of the Eth-Trunk are different. hwTrunkMemSpeedDifferentResume: The rates of active interfaces of the Eth-Trunk are changed to be the same. hwPortErrorRateExceed: The rate of CRC, Giants, and Runts error packets received by an interface is greater than or equal to 1000 packets per second. NOTE: Only the S5720-EI supports this field. hwPhysicalPortInBroadcastRapidChange: The rapid-change-ratio of inputbroadcast exceeded the threshold. hwSubIfNumExceededSpecAlarm: The number of sub-interfaces on the switch exceeds the maximum value. NOTE: Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this field. hwSubIfNumExceededSpecAlarmResume: The number of sub-interfaces on the switch is within the normal range. NOTE: Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this field. hwInputRateChangeOverThresholdNotice: The sudden traffic volume change in the inbound direction of interfaces. hwOutputRateChangeOverThresholdNotice: The sudden traffic volume change in the outbound direction of interfaces. hwPortProtectGroupUnavailable: The port protection group function becomes unavailable. hwPortProtectGroupAvailable: The port protection group function becomes available. hwPortProtectGroupDelete: The port protection group is deleted. hwCableSnrAbnormal: The network cable quality is abnormal. NOTE: Only the S5720I-SI, S5720-LI, S5735-L, S5735S-L, S5735S-L-M, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, and S6720-SI support this field. hwCableSnrNormal: The network cable quality is normal. NOTE: Only the S5720I-SI, S5720-LI, S5735-L, S5735S-L, S5735S-L-M, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, and S6720-SI support this field. hwCableSnrDetectNotSupport: The network cable quality cannot be checked. NOTE: Only the S5720I-SI, S5720-LI, S5735-L, S5735S-L, S5735S-L-M, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, and S6720-SI support this field. hwPortLRMStateAbnormal: LRM state of this port is abnormal. NOTE: Only the S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, and S6720-EI support this field. hwVxlanTrunkHashNotSupport: This object indicates that the IP address-based load balancing mode configured on an Eth-Trunk does not take effect for VXLAN packets when the Eth-Trunk functions as the outbound interface of VXLAN packets. NOTE: Only the S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this field. hwTrunkUUHashRisk: The rate of receiving CRC error packets equals or exceeds 1000 packets per second. hwPhysicalPortCrcRatioExceed: This object indicates that the percentage of received CRC packets on an interface against all the received packets exceeds the alarm threshold. NOTE: Only the S2720-EI, S5720-EI, S5720-HI, S5720-LI, S5735-L, S5735S-L, S5735S-L-M, S5720-SI, S5735-S, S5735S-S, S5735-S-I, S5720S-LI, S5720S-SI, S5730-HI, S5731-H, S5731S-H, S5731-S, S5731S-S, S6720-EI, S6720-SI, and S6720S-EI supports this object. hwPhysicalPortCrcRatioResume: This object indicates that the percentage of received CRC packets on an interface against all the received packets is lower than the alarm threshold. NOTE: Only the S2720-EI, S5720-EI, S5720-HI, S5720-LI, S5735-L, S5735S-L, S5735S-L-M, S5720-SI, S5735-S, S5735S-S, S5735-S-I, S5720S-LI, S5720S-SI, S5730-HI, S5731-H, S5731S-H, S5731-S, S5731S-S, S6720-EI, S6720-SI, and S6720S-EI supports this object. hwInputDiscardNotice: This object indicates that the number of discarded incoming packets on an interface due to a network congestion exceeds the threshold. hwOutputDiscardNotice: This object indicates that the number of discarded outgoing packets on an interface due to a network congestion exceeds the threshold. hwTunnelIfNumExceededSpecAlarm: The number of tunnel interfaces exceeded the upper limit.
Default switch status	Status of the default trap function: on: indicates that the trap function is enabled. off: indicates that the trap function is disabled.
Current switch status	Status of the current trap function: on: indicates that the trap function is enabled. off: indicates that the trap function is disabled.