display snmp-agent trap feature-name l2bptnl all

Function

The display snmp-agent trap feature-name l2bptnl all command displays all trap messages of the Layer 2 tunneling module.

Format

display snmp-agent trap feature-name l2bptnl all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After the trap function of a specified feature is enabled, you can run the display snmp-agent trap feature-name l2bptnl all command to check the status of all traps of l2bptnl. You can use the snmp-agent trap enable feature-name l2bptnl command to enable the trap function of l2bptnl.

Prerequisites

SNMP has been enabled. See snmp-agent.

Example

# Display all trap messages of the Layer 2 tunneling module.

<HUAWEI>display snmp-agent trap feature-name l2bptnl all
------------------------------------------------------------------------------                                                      
Feature name: L2BPTNL                                                                                                               
Trap number : 2                                                                                                                     
------------------------------------------------------------------------------                                                      
Trap name                       Default switch status   Current switch status                                                       
hwL2ProtocolTunnelDropThresholdRaising                                                                                              
                                on                      on                                                                          
hwL2ProtocolTunnelDropThresholdFalling                                                                                              
                                on                      on

**Table 1** Description of the display snmp-agent trap feature-name l2bptnl all command output
Item	Specification
Feature name	Name of the module that the trap belongs to.
Trap number	Number of traps.
Trap name	Name of a trap message of the Layer 2 tunneling module: hwL2ProtocolTunnelDropThresholdRaising: alarm generated when the number of discarded protocol packets on the Layer 2 protocol tunneling-enabled interface exceeds the threshold. hwL2ProtocolTunnelDropThresholdFalling: alarm generated when the number of discarded protocol packets on the Layer 2 protocol tunneling-enabled interface falls below the threshold.
Default switch status	Default status of the trap function: on: indicates that the trap function is enabled by default. off: indicates that the trap function is disabled by default.
Current switch status	Status of the trap function: on: indicates that the trap function is enabled. off: indicates that the trap function is disabled. To specify the parameter, run the snmp-agent trap enable feature-name l2bptnl command.