display snmp-agent trap feature-name l3mb all

Function

The display snmp-agent trap feature-name l3mb all command displays the status of all the traps related to the L3MB module.

Format

display snmp-agent trap feature-name l3mb all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display snmp-agent trap feature-name l3mb all command to view the status of all the traps related to the L3MB module.

You can run the snmp-agent trap enable feature-name l3mb command to change the status of the traps related to the L3MB module.

Example

# Display the status of all traps related to the L3MB module.

<HUAWEI> display snmp-agent trap feature-name l3mb all
------------------------------------------------------------------------------  
Feature name: L3MB                                                              
Trap number : 6                                                                 
------------------------------------------------------------------------------  
Trap name                       Default switch status   Current switch status   
hwBoardL3FwdResLack             on                      on                      
hwBoardL3FwdResLackResume       on                      on                      
hwBoardL3ACLResLack             on                      on
hwBoardServiceFailed            on                      on
hwBoardIPv6ACLResLack           on                      on
hwBoardL3NDResLack              on                      on
hwFwdEntryConflict              on                      on                      
hwFwdEntryConflictResume        on                      on
hwBoardL3ResFull                on                      on

**Table 1** Description of the **display snmp-agent trap feature-name l3mb all** command output
Item	Description
Feature name	Name of the module to which a trap belongs.
Trap number	Number of traps.
Trap name	Name of a trap of the L3MB module: hwBoardL3FwdResLack: The Layer 3 resource usage reaches or exceeds the upper threshold. hwBoardL3FwdResLackResume: The Layer 3 resource usage falls below the lower threshold. hwBoardL3ACLResLack: The Layer 3 service is abnormal because ACL resources are insufficient. hwBoardServiceFailed: The switch does not support this trap. hwBoardIPv6ACLResLack: The IPv6 service is abnormal because ACL resources are insufficient. hwBoardL3NDResLack: ND entries fail to be saved because of a hash conflict. hwFwdEntryConflict: The switch detected an anomaly when periodically checking l3-forward-entries. hwFwdEntryConflictResume: The switch detected that l3-forward-entries return to normal. hwBoardL3ResFull: The layer 3 resource usage of the switch has reached 100%. hwBfdConfigIntervalShort: The interval for receiving or sending BFD packets is too small, and the BFD session may flap.
Default switch status	Default status of the trap function: on: The trap function is enabled by default. off: The trap function is disabled by default.
Current switch status	Current status of the trap function: on: The trap function is enabled. off: The trap function is disabled.