display snmp-agent trap feature-name mad all

Function

display snmp-agent trap feature-name mad all command displays the status of all traps in the MAD module.

Format

display snmp-agent trap feature-name mad all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After the trap function of the MAD module is enabled using the snmp-agent trap enable feature-name mad command, you can run the display snmp-agent trap feature-name mad all command to check the status of all traps in the MAD module.

Prerequisites

SNMP has been enabled using the snmp-agent command.

Example

# Display the status of all the traps in the MAD module.

<HUAWEI>display snmp-agent trap feature-name mad all

------------------------------------------------------------------------------                                                      
Feature name: MAD                                                                                                                   
Trap number : 2                                                                                                                     
------------------------------------------------------------------------------                                                      
Trap name                       Default switch status   Current switch status                                                       
hwMadConflictDetect             on                      on                                                                          
hwMadConflictResume             on                      on

**Table 1** Description of the **display snmp-agent trap feature-name mad all** command output
Item	Specification
Feature name	Name of the module that the trap belongs to.
Trap number	Number of traps.
Trap name	Trap name: hwMadConflictDetect: A MAD conflict is detected. hwMadConflictResume: Existing stacks are merged.
Default switch status	Default status of the trap function: on: The trap function is enabled by default. off: The trap function is disabled by default.
Current switch status	Status of the trap function: on: The trap function is enabled. off: The trap function is disabled.