display snmp-agent trap feature-name mid_aaa all

Function

The display snmp-agent trap feature-name mid_aaa all command displays the status of all traps on the AAA module.

Format

display snmp-agent trap feature-name mid_aaa all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After enabling the trap function for the AAA module, you can run this command to check the status of all traps on the AAA module. To enable the trap function for the AAA module, run the snmp-agent trap enable feature-name mid_aaa command.

Prerequisites

The SNMP function has been enabled on the device. For details, see snmp-agent.

Example

# Display the status of all traps on the AAA module.

<HUAWEI> display snmp-agent trap feature-name mid_aaa all
------------------------------------------------------------------------------  
Feature name: MID_AAA                                                           
Trap number : 2                                                                 
------------------------------------------------------------------------------  
Trap name                       Default switch status   Current switch status   
hwMacMovedQuietMaxUserAlarm     on                      on                      
hwMacMovedQuietUserClearAlarm   on                      on

**Table 1** Description of the **display snmp-agent trap feature-name mid_aaa all** command output
Item	Description
Feature name	Name of the module to which a trap belongs.
Trap number	Number of traps.
Trap name	Name of a trap. Traps on the AAA module include: hwMacMovedQuietMaxUserAlarm: A Huawei proprietary trap message is sent when the percentage of current MAC address migration users in quiet state against the maximum number of users exceeds the upper alarm threshold. hwMacMovedQuietUserClearAlarm: A Huawei proprietary trap message is sent when the percentage of current MAC address migration users in quiet state against the maximum number of users decreases to be equal to or smaller than the lower alarm threshold.
Default switch status	Default status of the trap function: on: The trap function is enabled by default. off: The trap function is disabled by default.
Current switch status	Trap status: on: The trap is enabled. off: The trap is disabled.