display snmp-agent trap feature-name mpls_lspm all

Feature name

Name of the module to which a trap message belongs.

Trap number

Number of trap messages.

Trap name

Name of a trap message of the MPLS LSPM module:

• mplsXCUp: The trap of the event that an LSP goes Up.
• mplsXCDown: The trap of the event that an LSP goes Down.
• hwMplsStaticLspUp: The private trap of the event that a static LSP goes Up.
• hwMplsStaticLspDown: The private trap of the event that a static LSP goes Down.
• hwMplsLdpVirtualTunnelUp: The trap of the event that an LDP virtual tunnel goes Up.
• hwMplsLdpVirtualTunnelDown: The trap of the event that an LDP virtual tunnel goes Down.
• hwMplsLspThresholdExceed: The function to generate an alarm if the number of LSPs exceeds the alarm threshold.
• hwMplsLspThresholdExceedClear: The function to clear an alarm if the number of LSPs falls below the alarm threshold.
• hwMplsLspTotalCountExceed: The function to generate an alarm if the number of LSPs exceeds the maximum limit.
• hwMplsLspTotalCountExceedClear: The function to clear an alarm if the number of LSPs falls below the maximum limit.
• hwMplsDynamicLabelThresholdExceed: Dynamic label usage reached the upper limit.
• hwMplsDynamicLabelThresholdExceedClear: Dynamic label usage reached the lower limit.
• hwMplsDynamicLabelTotalCountExceed: Dynamic label usage reached 100%.
• hwMplsDynamicLabelTotalCountExceedClear: Dynamic label usage fell to 95%.
• hwMplsResourceThresholdExceed: The function to generate an alarm if the number of used MPLS resources exceeds the alarm threshold.
• hwMplsResourceThresholdExceedClear: The function to clear an alarm if the number of used MPLS resources falls below the alarm threshold.
• hwMplsResourceTotalCountExceed: The function to generate an alarm if the number of used MPLS resources exceeds the maximum limit.
• hwMplsResourceTotalCountExceedClear: The function to clear an alarm if the number of used MPLS resources falls below the maximum limit.
• mplsTunnelUp: The trap of the event that a tunnel goes Up.
• mplsTunnelDown: The trap of the event that a tunnel goes Down.
• hwMplsStaticCRLspUp: The private trap of the event that a static CR-LSP goes Up.
• hwMplsStaticCRLspDown: The private trap of the event that a static CR-LSP goes Down.
• mplsTunnelReoptimized: The trap of the tunnel reoptimization event.
• mplsTunnelRerouted: The trap of the tunnel reroute event.
• hwMplsTeFrrSwitch: The private trap of the event of TE FRR protection switching.
• hwMplsTeFrrResume: The private trap of the event of TE FRR fault recovery.
• hwMplsTunnelHSBSwitch: The private trap of the event that traffic switches from the primary CR-LSP to the hot-standby CR-LSP.
• hwMplsTunnelHSBResume: The private trap of the event that traffic switches from the hot-standby CR-LSP to the primary CR-LSP.
• hwMplsTunnelOBSwitch: The private trap of the event that traffic switches from the primary CR-LSP to the ordinary backup CR-LSP.
• hwMplsTunnelOBResume: The private trap of the event that traffic switches from the ordinary backup CR-LSP to the primary CR-LSP.
• hwMplsTeFrrProtAval: The trap of the TE FRR bypass tunnel binding event.
• hwMplsTeFrrProtNotAval: The trap of the TE FRR bypass tunnel unbinding event.
• hwmplsTunnelChangeBW: The private trap of the event that the tunnel bandwidth changes.
• hwMplsTunnelPrimaryUp: The trap of the event that the primary LSP of the tunnel changes to Up.
• hwMplsTunnelPrimaryDown: The trap of the event that the primary LSP of the tunnel changes to Down.
• hwMplsTunnelHotstandbyUp: The trap of the event that the hot-standby LSP of the tunnel changes to Up.
• hwMplsTunnelHotstandbyDown: The trap of the event that the hot-standby LSP of the tunnel changes to Down.
• hwMplsTunnelOrdinaryUp: The trap of the event that the ordinary LSP of the tunnel changes to Up.
• hwMplsTunnelOrdinaryDown: The trap of the event that the ordinary LSP of the tunnel changes to Down.
• hwMplsTunnelBesteffortUp: The trap of the event that the best-effort LSP of the tunnel changes to Up.
• hwMplsTunnelBesteffortDown: The trap of the event that the best-effort LSP of the tunnel changes to Down.
• hwMplsTeAutoTunnelDownClear: The trap of the event that the TE Auto tunnel Down alarm was cleared.
• hwMplsTeAutoTunnelPrimaryDownClear: The trap of the event that the Down alarm about the primary LSP in the TE Auto tunnel was cleared.
• hwMplsTunnelBBSwitch: The alarm for switchover from the primary LSP to the bypass LSP in common backup mode (BBK).
• hwMplsTunnelBBResume: The trap of main LSP of tunnel resumes from backup LSP in BBK.
• hwMplsExtTunnelDown: The trap of the event that the TE tunnel changes to Down.
• hwMplsExtTunnelDownClear: The trap of the event that the TE tunnel Down alarm was cleared.
• hwMplsTunnelDelete: The function to generate an alarm if an MPLS TE tunnel is deleted.
• hwMplsTunnelCommitLost: The configuration of an MPLS TE tunnel was not committed.
• hwMplsTunnelCommitLostClear: The configuration of all MPLS TE tunnel were committed.
• hwMplsTunnelHotstandbySwitch: The primary LSP went Down and traffic was switched to a hot-standby LSP.
• hwMplsTunnelHotstandbyResume: The primary LSP went Up and traffic was switched back from the hot-standby LSP to the primary LSP.

Default switch status

Current switch status