display snmp-agent trap feature-name pim all

Function

The display snmp-agent trap feature-name pim all command displays the status of all PIM traps.

Format

display snmp-agent trap feature-name pim all

Only the S5720-EI, S5720-HI, S5720I-SI, S5720-LI, S5735-L, S5735S-L, S5735S-L-M, S5720S-LI, S5720S-SI, S5720-SI, S5735-S, S5735S-S, S5735-S-I, S5730-HI, S5730S-EI, S5730-SI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720-LI, S6720S-EI, S6720S-LI, S6720S-SI, S6720-SI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display snmp-agent trap feature-name pim all command to view the status of all PIM traps when you want to monitor the current status of PIM protocol events but are not sure whether the PIM trap function is enabled. You can use the snmp-agent trap enable feature-name pim command to enable the trap function of PIM.

Example

# Display whether the trap function is enabled for the PIM module.

<HUAWEI> display snmp-agent trap feature-name pim all
------------------------------------------------------------------------------  
Feature name: PIM                                                               
Trap number : 16                                                                
------------------------------------------------------------------------------  
Trap name                       Default switch status   Current switch status   
neighbor-loss                   off                     on                      
invalid-register                off                     on                      
invalid-join-prune              off                     on                      
rp-mapping-change               off                     on                      
interface-election              off                     on                      
new-neighbor                    off                     on                      
mrt-limit                       off                     on                      
HWPIMMRTLIMITCLEAR              off                     on                      
hwPimStarGThresholdExceed       off                     on                      
hwPimSGThresholdExceed          off                     on                      
hwPimStarGExceed                off                     on                      
hwPimSGExceed                   off                     on                      
hwPimStarGThresholdExceedClear  off                     on                      
hwPimSGThresholdExceedClear     off                     on                      
hwPimStarGExceedClear           off                     on                      
hwPimSGExceedClear              off                     on

Choose Columns...

**Table 1** Description of the **display snmp-agent trap feature-name pim all** command output
Item	Description
Feature name	Name of the module.
Trap number	Number of trap event types.
Trap name	Trap event type. The following types of trap events are defined: neighbor-loss: A neighbor is lost. invalid-register: An invalid Register message is received. invalid-join-prune: An invalid Join/Prune message is received. rp-mapping-change: The RP-mapping changes. interface-election: An interface is elected as the DR. new-neighbor: A new neighbor appears. mrt-limit: The number of PIM entries exceeds the limit for the multicast routing table (MRT). HWPIMMRTLIMITCLEAR: The total number of PIM entries falls below the limit. hwPimStarGThresholdExceed: The proportion of PIM (, G) entries created to the maximum PIM (, G) entries allowed exceeds the upper alarm threshold. hwPimSGThresholdExceed: The proportion of PIM (S, G) entries created to the maximum PIM (S, G) entries allowed exceeds the upper alarm threshold. hwPimStarGExceed: The number of PIM (, G) entries created exceeds the maximum number of PIM (, G) entries allowed. hwPimSGExceed: The number of PIM (S, G) entries created exceeds the maximum number of PIM (S, G) entries allowed. hwPimStarGThresholdExceedClear: The proportion of PIM (, G) entries created to the maximum PIM (, G) entries allowed falls below the lower alarm threshold. hwPimSGThresholdExceedClear: The proportion of PIM (S, G) entries created to the maximum PIM (S, G) entries allowed falls below the lower alarm threshold. hwPimStarGExceedClear: The number of PIM (, G) entries created falls below the maximum number of PIM (, G) entries allowed. hwPimSGExceedClear: The number of PIM (S, G) entries created falls below the maximum number of PIM (S, G) entries allowed.
Default switch status	Default status of a trap function: on: indicates that the trap function is enabled by default. off: indicates that the trap function is disabled by default.
Current switch status	Current status of a trap function: on: indicates that the trap function is enabled. off: indicates that the trap function is disabled.