display snmp-agent trap feature-name pm all

Function

The display snmp-agent trap feature-name pm all command displays whether the switch is enabled to send traps of PM feature to the NMS.

Format

display snmp-agent trap feature-name pm all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After running the snmp-agent trap enable feature-name pm command to enable the function of sending traps of the PM feature to the NMS, you can run the display snmp-agent trap feature-name pm all command to check whether this function is enabled.

Prerequisites

SNMP has been enabled. For details, see snmp-agent.

Example

# Display whether the switch is enabled to send traps of PM feature to the NMS.

<HUAWEI> display snmp-agent trap feature-name pm all
------------------------------------------------------------------------------  
Feature name: PM                                                                
Trap number : 3                                                                 
------------------------------------------------------------------------------  
Trap name                       Default switch status   Current switch status   
hwPMStatisticsTaskThresholdTriggerAlarm                                         
                                on                      on                      
hwPMStatisticsTaskThresholdClearAlarm                                           
                                on                      on                      
hwPMMeasureExceed               on                      on

**Table 1** Description of the **display snmp-agent trap feature-name pm all** command output
Item	Description
Feature name	Name of the feature that generates traps.
Trap number	Number of traps generated by PM feature.
Trap name	Name of the trap.
Default switch status	Default status of a trap: on: The switch is enabled to send this trap to the NMS. off: The switch is disabled to send this trap to the NMS.
Current switch status	Current status of a trap: on: The switch is enabled to send this trap to the NMS. off: The switch is disabled to send this trap to the NMS. This status can be configured using the snmp-agent trap enable feature-name pm command.