display snmp-agent trap feature-name rip all

Function

The display snmp-agent trap feature-name rip all command displays all trap messages of the RIP module.

Format

display snmp-agent trap feature-name rip all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The Simple Network Management Protocol (SNMP) is a standard network management protocol widely used on TCP/IP networks. It uses a central computer (a network management station) that manages network elements through network management software. The management agent on the network element automatically reports trap messages to the network management station. After that, the network administrator immediately takes measures to resolve network problems.

To check whether the trap functions of the RIP module are enabled, run the display snmp-agent trap feature-name rip all command.

Example

# Display all trap messages of the RIP module.

<HUAWEI> display snmp-agent trap feature-name rip all

------------------------------------------------------------------------------
Feature name: rip
Trap number : 2
------------------------------------------------------------------------------
Trap name                       Default switch status   Current switch status
hwRip2DBOverFlow                off                     on
hwRip2DBOverFlowResume          off                     on

**Table 1** Description of the **display snmp-agent trap feature-name rip all** command output
Item	Description
Feature name	Name of the feature.
Trap number	Number of traps.
Trap name	Name of the trap: hwRip2DBOverFlow: is sent when the number of routes in the RIP database reaches the threshold. hwRip2DBOverFlowResume: is sent when the number of routes in the RIP database falls below the threshold.
Default switch status	Default trap function status: on: The trap function is enabled. off: The trap function is disabled.
Current switch status	Current trap function status: on: The trap function is enabled. off: The trap function is disabled.