display snmp-agent trap feature-name vcmp all

Function

The display snmp-agent trap feature-name vcmp all command displays all trap functions of the VCMP module.

Format

display snmp-agent trap feature-name vcmp all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After the trap function of a specified feature is enabled, you can run the display snmp-agent trap feature-name vcmp all command to check the status of all traps of VCMP. You can use the snmp-agent trap enable feature-name vcmp command to enable the trap function of VCMP.

Prerequisites

SNMP has been enabled. See snmp-agent.

Example

# Display all trap functions of the VCMP module.

<HUAWEI>display snmp-agent trap feature-name vcmp all

------------------------------------------------------------------------------
Feature name: VCMP
Trap number : 2
------------------------------------------------------------------------------
Trap name                       Default switch status   Current switch status
hwVcmpServerMacConflict         on                      on
hwVcmpRevisionConflict          on                      on

**Table 1** Description of the **display snmp-agent trap feature-name vcmp all** command output
Item	Description
Feature name	Name of the module to which a trap message belongs.
Trap number	Number of trap messages.
Trap name	Name of a trap message of the VCMP module: hwVcmpRevisionConflict: A Huawei proprietary trap when the server in a VCMP domain receives a VCMP packet with a higher revision number. hwVcmpServerMacConflict: A Huawei proprietary trap when multiple servers coexist in the same VCMP domain.
Default switch status	Status of the default trap function: on: The trap function is enabled. off: The trap function is disabled.
Current switch status	Status of the current trap function: on: The trap function is enabled. off: The trap function is disabled. To specify the parameter, run the snmp-agent trap enable feature-name vcmp command.