display stack peers

Function

The display stack peers command displays information about the neighbors of a member switch.

Format

display stack peers

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To check information about the neighbors of a member switch, run the display stack peers command.

This command can be used only after the stack function is enabled (default status).

Example

# Display information about the neighbors of a member switch.

<HUAWEI> display stack peers
Slot      Port1                   Peer1       Port2                   Peer2     
---------------------------------------------------------------------------     
0         STACK 1                   1         STACK 2                 None      
1         STACK 1                 None        STACK 2                   0

**Table 1** Description of the **display stack peers** command output
Item	Description
Slot	Stack ID of a member switch.
Port1	Stack port 1.
Peer1	Stack ID of the switch to which stack port 1 connects. If this field displays ID(B), stack port 1 is blocked. If this field displays None, there is no peer device.
Port2	Stack port 2.
Peer2	Stack ID of the switch to which stack port 2 connects. If this field displays ID(B), stack port 2 is blocked. If this field displays None, there is no peer device.