display stack port auto-cable-info

Function

The display stack port auto-cable-info command displays information about dedicated stack cables.

Format

display stack port auto-cable-info slot slot-id

Parameters

Parameter	Description	Value
slot slot-id	Specifies the stack ID of a member switch.	The value range depends on the device.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display stack port auto-cable-info command to check interfaces supporting dedicated stack cables and whether dedicated stack cables have been connected to interfaces.

Example

# Display information about dedicated stack cables on the switch with the slot ID 0.

<HUAWEI> display stack port auto-cable-info slot 0
Logic Port         Phy Port                     Cable-role                                                                          
----------------------------------------------------------                                                                          
stack-port0/1      XGigabitEthernet0/0/1        Slave                                                                               
stack-port0/1      XGigabitEthernet0/0/2        --                                                                                  
stack-port0/2      XGigabitEthernet0/0/3        --                                                                                  
stack-port0/2      XGigabitEthernet0/0/4        Master

**Table 1** Description of the **display stack port auto-cable-info** command output
Item	Description
Logic Port	Logical stack port.
Phy Port	Physical member port.
Cable-role	Role of a dedicated stack cable: Master: The installed dedicated stack cable is the master end. Slave: The installed dedicated stack cable is the slave end. --: No dedicated stack cable is connected to the current port.