display station neighbor

Function

The display station neighbor command displays the neighbor list of a specified STA.

Format

display station neighbor sta-mac mac-address

Parameters

Parameter	Description	Value
sta-mac mac-address	Specifies the MAC address of a STA.	The MAC address must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to check the neighbor list of the STA with a specified MAC address.

Example

# Display the neighbor list of the STA with a specified MAC address.

<HUAWEI> display station neighbor sta-mac d022-be5e-021f
--------------------------------------------------------------------------------------------------------------------------------
Device MAC         Device ID   Device Name        Radio ID  Channel  Probe info(RSSI/HH:MM:SS)   11k info[RCPI/RSNI/HH:MM:SS]
--------------------------------------------------------------------------------------------------------------------------------
d022-be5e-021f     0           d022-be5e-021f     1         165      -44/15:05:11                -                           
--------------------------------------------------------------------------------------------------------------------------------
Total neighbors: 1, total records: 1

System Response

**Table 1** Description of the **display station neighbor** command output
Item	Description
Device MAC	MAC address of a neighboring device.
Device ID	ID of a neighboring device.
Device Name	Name of a neighboring device.
Radio ID	Radio ID of a neighboring device.
Channel	Channel of a neighboring device.
Probe info(RSSI/HH :MM:SS)	Probe information about the STA, including the RSSI and timestamp.
11k info[RCPI/RSNI/HH:MM:SS]	802.11k information about the STA, including the Received Channel Power Indicator, Received Signal-to-Noise Indication, and timestamp. NOTE: If the STA does not support 802.11k, this parameter is displayed as "-".