display station steer-statistics

Function

The display station steer-statistics command displays statistics about STA migrations.

Format

display station steer-statistics

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After the load balancing, band steering, or smart roaming function is enabled, STAs are migrated. You can run this command to check statistics about STA migrations.

Example

# Display statistics about migrations of all STAs.

<HUAWEI> display station steer-statistics
------------------------------------------------------------------------------------------------------------------------------------
Reason        Total/Success        Deauth(Total/Success)   BTM(Total/Accept/REJ1/REJ2/REJ3/REJ4/REJ5/REJ6/REJ7/REJ8/TimeOut)
------------------------------------------------------------------------------------------------------------------------------------
Sticky        0/0                  0/0                     0/0/0/0/0/0/0/0/0/0/0
Load-balance  0/0                  0/0                     0/0/0/0/0/0/0/0/0/0/0
Band-steer    0/0                  0/0                     0/0/0/0/0/0/0/0/0/0/0
Total         0/0                  0/0                     0/0/0/0/0/0/0/0/0/0/0
------------------------------------------------------------------------------------------------------------------------------------

**Table 1** Description of the **display station steer-statistics** command output
Item	Description
Reason	Reason why a STA is triggered to migrate. Sticky: The STA is sticky. Load-balance: Load balancing is implemented. Band-steer: Band steering is implemented.
Total/Success	Total number of triggered STA migrations/Number of successful STA migrations.
Deauth(Total/Success)	Total number of STA migrations triggered in deauthentication mode/Number of successful STA migrations triggered in deauthentication mode.
BTM(Total/Accept/REJ1/REJ2/REJ3/REJ4/REJ5/REJ6/REJ7/REJ8/TimeOut)	Total number of STA migrations triggered in BTM mode/Number of successful STA migrations triggered in BTM mode/Number of rejected STA migrations in BTM mode/Number of STA migrations that are timed out in BTM mode. The options are as follows: REJ1: Reject-Unspecified reject reason. REJ2: Reject-Insufficient Beacon or Probe Response frames received from all candidates. REJ3: Reject-Insufficient available capacity from all candidates. REJ4: Reject-BSS termination undesired. REJ5: Reject-BSS termination delay requested. REJ6: Reject-STA BSS Transition Candidate List provided. REJ7: Reject-No suitable BSS transition candidates. REJ8: Reject-Leaving ESS.