display switchover state

Function

The display switchover state command displays information about active/standby switchover, which helps check whether the stack meets switchover requirements.

Format

display switchover state

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

In a stack containing multiple switches, you can run the display switchover state command to view the status of master and standby switches to determine whether to perform an active/standby switchover. When performing active/standby switchover, ensure that the standby switch is in real-time backup state.

Example

# Display information about active/standby switchover, which helps check whether the stack meets switchover requirements.

<HUAWEI> display switchover state
Slot 1 HA FSM State(master): waiting for the slave to be inserted.

**Table 1** Description of the display switchover state command output
Item	Description
HA FSM State(master)	Master switch status: The slave has been inserted: The slave switch has been inserted. waiting for the slave to be inserted: The master switch is waiting for the slave switch to be inserted. waiting the batch backup request from the slave: The master switch is waiting for the batch backup request from the slave switch. batch global data: Backup global data in batch batch backup: Backup data in batch batch check: Check the backup data in batch realtime or routine backup: Backup data periodically or promptly data smooth: Synchronize data
HA FSM State(slave)	Standby switch status: ready: The standby switch is started and ready for receiving the batch backup data. receiving batch data: The standby switch is receiving the batch backup data. receiving realtime or routine data: The standby switch is ready for receiving data in real time.