display telnet-client

Function

The display telnet-client command displays the source parameters when a device works as a Telnet client.

Format

display telnet-client

Parameters

None

Views

All views

Default Level

3: Management level

Usage Guidelines

After setting source parameters of a Telnet client, you can run this command to check the setting result. If you have not run the telnet client-source command, the default source IP address is 0.0.0.0.

Example

# Display the source parameters of the device functioning as a Telnet client.

<HUAWEI> display telnet-client

 The source address of telnet client is 10.1.1.1

**Table 1** Description of the **display telnet-client** command output
Item	Description
The source address of telnet client is 10.1.1.1	The source IP address of the Telnet client is 10.1.1.1.