display trace information

Function

The display trace information command displays information about service diagnosis.

Format

display trace information

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After configuring service diagnosis, you can run this command to view global information about service diagnosis, for example, the counts of diagnosis instances and objects created on the device.

Example

# Display information about service diagnosis.

<HUAWEI> display trace information
Trace Information:
------------------------------------------------------------
Trace Enable                            : Enable
Debug info level                        : Brief
Debug fill-instance                     : Off
Debug quit-instance                     : Off
Debug output information                : Off
Syslog Source IP Address                : -

The sum of all the instances            : 0
The startID of the instance table       : -
Alloc instance times                    : 9
Free instance times                     : 9
The sum of all the objects              : 2
------------------------------------------------------------

**Table 1** Description of the **display trace information** command output
Item	Description
Trace Information	Information about service diagnosis.
Trace Enable	Status of service diagnosis. Disable: Service diagnosis is disabled. Enable: Service diagnosis is enabled. This field can be modified using the trace enable command.
Debug info level	Output level of service diagnosis information. Brief: brief service diagnosis information. Detail: detailed service diagnosis information. This field can be modified using the trace enable command.
Debug fill-instance	Debugging status of the fill-instance module. Off: disabled On: enabled
Debug quit-instance	Debugging status of the quit-instance module. Off: disabled On: enabled
Debug output information	Debugging status of the output information module. Off: disabled On: enabled
Syslog Source IP Address	Source IP address of the interface for exporting diagnosis information to the log server. To set the IP address of the interface for exporting diagnosis information to a log server, run the trace syslog source command.
The sum of all the instances	Total number of diagnosis instances.
The startID of the instance table	Start ID of the instance table.
Alloc instance times	Number of the allocated diagnosis instances.
Free instance times	Number of the release diagnosis instances.
The sum of all the objects	Total number of diagnosis objects.