display trace object

Function

The display trace object command displays the configuration about a service diagnosis object.

Format

display trace object [ service-object-id ] [ process-wlan ]

The process-wlan parameter is only supported by S5730-HI, S5731-H, S5731S-H, S6730-H, S6730S-H, S5732-H, S6720-HI, and S5720-HI.

Parameters

Parameter	Description	Value
service-object-id	Specifies the ID of a diagnosis object.	The value is an integer that ranges from 0 to 3.
process-wlan	Specifies the WLAN sub-core.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

If you do not specify the parameter service-object-id, configurations about all diagnosis objects are displayed.

Example

# Display configurations about all diagnosis objects.

<HUAWEI> display trace object
Trace Object:
------------------------------------------------------------
  Object ID      : 0
  Slot           : -
  MAC Address    : -
  IP Flag        : -
  Session ID     : -
  IP Address     : 10.1.1.1
  VRF Index      : -
  CID            : -
  User Name      : -
  Interface      : -
  QinQ VLAN ID   : -
  User VLAN ID   : -
  Access Mode    : -
  Output         : command line ( User-Intf 4 )

  Object ID      : 1
  Slot           : -
  MAC Address    : 0101-0101-0101
  IP Flag        : -
  Session ID     : -
  IP Address     : -
  VRF Index      : -
  CID            : -
  User Name      : -
  Interface      : -
  QinQ VLAN ID   : -
  User VLAN ID   : -
  Access Mode    : -
  Output         : file ( flash:/a.txt )

  Object ID      : 2
  Slot           : -
  MAC Address    : 0101-0101-0101
  IP Flag        : -
  Session ID     : -
  IP Address     : 10.2.2.2
  VRF Index      : -
  CID            : -
  User Name      : -
  Interface      : -
  QinQ VLAN ID   : -
  User VLAN ID   : -
  Access Mode    : -
  Output         : server ( 10.10.10.10 )

------------------------------------------------------------
  Total 3, 3 printed

**Table 1** Description of the display trace object command output
Item	Description
Object ID	ID of the diagnosis object. This parameter is automatically generated from 0 in sequence of creation time.
Slot	Slot ID of the device.
MAC Address	MAC address of the interface. To set the MAC address of an interface, run the trace object command.
IP Flag	Flag of the IP address.
Session ID	ID of the session, only valid for PPPoX users.
IP Address	IP address of the interface. To set the IP address of an interface, run the trace object command.
VRF Index	User VRF index.
CID	User connect ID.
User Name	User name. To set the user name, run the trace object command.
Interface	Interface index. To set the interface index, run the trace object command.
QinQ VLAN ID	QinQ VLAN ID. To set the QinQ VLAN ID, run the trace object command.
User VLAN ID	User VLAN ID. To set the user VLAN ID, run the trace object command.
Access Mode	User access mode, including dot1x, mac-authen, portal, and wlan. To set the user access mode, run the trace object command.
Output	Direction in which the device exports diagnosis information. To set the direction, run the trace object command. Command line (User-Intf X): Diagnosis information is displayed on the screen of a configuration terminal. NOTE: When the configuration terminal is online, X displays the absolute number of the user interface (the absolute number can be checked using the display users command). When the configuration terminal is offline, X displays offline. file: Diagnosis information is exported to files. server: Diagnosis information is exported to a log server.
Total 3, 3 printed	Total number of created diagnosis objects and count of displayed objects.