The display traffic-profile command displays configuration information about traffic profiles.
Parameter |
Description |
Value |
|---|---|---|
all |
Displays configuration information about all traffic profiles. |
- |
name profile-name |
Displays configuration information about a specified traffic profile. |
The value is a string of 1 to 35 characters without spaces and question marks (?). It cannot begin or end with a double quotation mark ("). |
You can run the display traffic-profile command to check default configurations of a new traffic profile or configurations of an existing traffic profile.
# Display configuration information about a traffic profile that maps the trusted user priority from 802.11 packets to tunnel packets when packets are sent from an AP to the AC.
<HUAWEI> display traffic-profile name p1
---------------------------------------------------------------------------------------------
Profile ID : 0
Priority map downstream trust : DSCP
User isolate mode : disable
Rate limit client up(Kbps) : 4294967295
Rate limit client down(Kbps) : 4294967295
Rate limit VAP up(Kbps) : 4294967295
Rate limit VAP down(Kbps) : 4294967295
Rate limit client dynamic switch : enable
Rate limit client dynamic(Mbps) : 16
Traffic optimize ARP proxy : disable
Traffic optimize ND proxy : disable
Traffic optimize ARP unicast send : enable
Traffic optimize ND unicast send : enable
Traffic optimize DHCP unicast send : disable
Traffic optimize multicast send deny : disable
Traffic optimize TCP adjust MSS(bytes) : -
Traffic optimize bcmc unicast send mismatch action : traverse
MLD snooping : disable
IGMP snooping : disable
IGMP snooping report suppress : disable
Spectralink voice priority : disable
Priority map upstream trust : 8021e
IGMP snooping max bandwidth(kbps) : -
IGMP snooping max user : -
Traffic optimize sta bridge forward : enable
Traffic optimize broadcast suppression(pps) : -
Traffic optimize multicast suppression(pps) : -
Traffic optimize unicast suppression(pps) : -
Traffic optimize multicast to unicast : disable
Dynamic adaptive : enable
Priority map tunnel upstream trust : 8021e
CAPWAP priority upstream map mode : 802.11e map DSCP
0 map 0
1 map 8
2 map 16
3 map 24
4 map 32
5 map 40
6 map 48
7 map 56
CAPWAP priority upstream map mode : 802.11e map 802.1p
0 map 0
1 map 1
2 map 2
3 map 3
4 map 4
5 map 5
6 map 6
7 map 7
WMM priority downstream map mode : DSCP map 802.11e
0-7 map 0
8-15 map 1
16-23 map 2
24-31 map 3
32-39 map 4
40-47 map 5
48-55 map 6
56-63 map 7
WMM priority downstream map mode : 802.1p map 802.11e
0 map 0
1 map 1
2 map 2
3 map 3
4 map 4
5 map 5
6 map 6
7 map 7
---------------------------------------------------------------------------------------------
Traffic Type Direction AppliedRecord
---------------------------------------------------------------------------------------------
traffic-filter inbound IPv4 ACL 3001 & L2 ACL 4001
---------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------
Traffic Type Direction RemarkType RemarkValue AppliedRecord
---------------------------------------------------------------------------------------------
traffic-remark inbound 802.11e 0 IPv4 ACL 3001
---------------------------------------------------------------------------------------------
# Display configuration information about a traffic profile that maps the trusted DSCP priority from 802.11 packets to tunnel packets when packets are sent from an AP to the AC.
<HUAWEI> display traffic-profile name p1
---------------------------------------------------------------------------------------------
Profile ID : 1
Priority map downstream trust : DSCP
User isolate mode : disable
Rate limit client up(Kbps) : 4294967295
Rate limit client down(Kbps) : 4294967295
Rate limit VAP up(Kbps) : 4294967295
Rate limit VAP down(Kbps) : 4294967295
Rate limit client dynamic switch : enable
Rate limit client dynamic(Mbps) : 16
Traffic optimize ARP proxy : disable
Traffic optimize ND proxy : disable
Traffic optimize ARP unicast send : enable
Traffic optimize ND unicast send : enable
Traffic optimize DHCP unicast send : enable
Traffic optimize multicast send deny : disable
Traffic optimize TCP adjust MSS(bytes) : -
Traffic optimize bcmc unicast send mismatch action : traverse
MLD snooping : disable
IGMP snooping : disable
IGMP snooping report suppress : disable
Spectralink voice priority : disable
Priority map upstream trust : 8021e
IGMP snooping max bandwidth(kbps) : -
IGMP snooping max user : -
Traffic optimize sta bridge forward : enable
Traffic optimize broadcast suppression(pps) : -
Traffic optimize multicast suppression(pps) : -
Traffic optimize unicast suppression(pps) : -
Traffic optimize multicast to unicast : disable
Dynamic adaptive : enable
Priority map tunnel upstream trust : DSCP
CAPWAP priority upstream map mode : 802.11e map DSCP
0 map 0
1 map 8
2 map 16
3 map 24
4 map 32
5 map 40
6 map 48
7 map 56
CAPWAP priority upstream map mode : 802.11e map 802.1p
0 map 0
1 map 1
2 map 2
3 map 3
4 map 4
5 map 5
6 map 6
7 map 7
WMM priority downstream map mode : DSCP map 802.11e
0-7 map 0
8-15 map 1
16-23 map 2
24-31 map 3
32-39 map 4
40-47 map 5
48-55 map 6
56-63 map 7
WMM priority downstream map mode : 802.1p map 802.11e
0 map 0
1 map 1
2 map 2
3 map 3
4 map 4
5 map 5
6 map 6
7 map 7
priority upstream map mode : DSCP map DSCP
0 map 0
1 map 1
2 map 2
3 map 3
4 map 4
5 map 5
6 map 6
7 map 7
8 map 8
9 map 9
10 map 10
11 map 11
12 map 12
13 map 13
14 map 14
15 map 15
16 map 16
17 map 17
18 map 18
19 map 19
20 map 20
21 map 21
22 map 22
23 map 23
24 map 24
25 map 25
26 map 26
27 map 27
28 map 28
29 map 29
30 map 30
31 map 31
32 map 32
33 map 33
34 map 34
35 map 35
36 map 36
37 map 37
38 map 38
39 map 39
40 map 40
41 map 41
42 map 42
43 map 43
44 map 44
45 map 45
46 map 46
47 map 47
48 map 48
49 map 49
50 map 50
51 map 51
52 map 52
53 map 53
54 map 54
55 map 55
56 map 56
57 map 57
58 map 58
59 map 59
60 map 60
61 map 61
62 map 62
63 map 63
priority tunnel upstream map mode : DSCP map 802.1p
0-7 map 0
8-15 map 1
16-23 map 2
24-31 map 3
32-39 map 4
40-47 map 5
48-55 map 6
56-63 map 7
---------------------------------------------------------------------------------------------
Traffic Type Direction AppliedRecord
---------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------
Traffic Type Direction RemarkType RemarkValue AppliedRecord
---------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------
Item |
Description |
|---|---|
Profile ID |
Traffic profile ID |
Priority map downstream trust |
Mapping from the 802.1p or DSCP priority of 802.3 packets to the 802.11 user priority when 802.3 packets are sent to an AP from upper-layer devices. To configure this parameter, run the priority-map downstream trust command. |
User isolate mode |
User isolation. To configure this parameter, run the user-isolate (traffic profile view) command. |
Rate limit client up(Kbps) |
Upstream rate limit configured for STAs. To configure this parameter, run the rate-limit command. |
Rate limit client down(Kbps) |
Downstream rate limit configured for STAs. To configure this parameter, run the rate-limit command. |
Rate limit VAP up(Kbps) |
Upstream rate limit configured for VAPs. To configure this parameter, run the rate-limit command. |
Rate limit VAP down(Kbps) |
Downstream rate limit configured for VAPs. To configure this parameter, run the rate-limit command. |
Rate limit client dynamic switch |
Whether dynamic rate limiting is enabled for a single STA in a VAP. To configure this parameter, run the rate-limit client dynamic disable command. |
Rate limit client dynamic(Mbps) |
Dynamic rate limit threshold of a single STA in a VAP. To configure this parameter, run the rate-limit client dynamic command. |
Traffic optimize ARP proxy |
ARP proxy. |
Traffic optimize ND proxy |
ND proxy. |
Traffic optimize ARP unicast send |
Function of converting broadcast or multicast ARP packets to unicast ARP packets. |
Traffic optimize ND unicast send |
Function of converting broadcast or multicast ND packets to unicast ND packets. |
Traffic optimize DHCP unicast send |
Function of converting broadcast or multicast DHCP packets to unicast DHCP packets. |
Traffic optimize multicast send deny |
Function of forbidding multicast packet forwarding. |
Traffic optimize sta bridge forward |
Function of forbidding STA bridging packet forwarding. |
Traffic optimize bcmc unicast send mismatch action |
Action when broadcast or multicast packets fail to be converted into unicast packets on air interfaces. To configure this parameter, run the traffic-optimize bcmc unicast-send mismatch-action drop command. |
MLD snooping |
MLD snooping. |
IGMP snooping |
IGMP snooping. |
Spectralink voice priority |
SVP voice traffic optimization. To configure this parameter, run the svp-voice enable command. |
IGMP snooping report suppress |
IGMP message suppression time. |
IGMP snooping max bandwidth(kbps) |
Maximum multicast bandwidth of a VAP. To configure this parameter, run the igmp-snooping max-bandwidth (traffic profile view) command. |
IGMP snooping max user |
Maximum number of multicast group memberships on a VAP. To configure this parameter, run the igmp-snooping max-user (traffic profile view) command. |
Traffic optimize broadcast suppression(pps) |
Maximum broadcast traffic volume allowed on an interface. To configure this parameter, run the traffic-optimize broadcast-suppression command. |
Traffic optimize multicast suppression(pps) |
Maximum multicast traffic volume allowed on an interface. To configure this parameter, run the traffic-optimize multicast-suppression command. |
Traffic optimize unicast suppression(pps) |
Maximum unicast traffic volume allowed on an interface. To configure this parameter, run the traffic-optimize unicast-suppression command. |
Traffic optimize multicast to unicast |
Function of converting multicast packets to unicast packets. To configure this parameter, run the traffic-optimize multicast-unicast enable command. |
Dynamic adaptive |
Whether to enable adaptive multicast-to-unicast conversion. To configure this function, run the traffic-optimize multicast-unicast dynamic-adaptive disable command. |
CAPWAP priority upstream map mode |
Mapping from WMM to the DSCP priority of the upstream CAPWAP tunnel. |
Priority map tunnel upstream trust |
Trusted priority mapping from 802.11 packets to tunnel packets when data packets are sent to the AC from an AP. To configure this parameter, run the priority-map tunnel-upstream trust command. |
Priority map upstream trust |
Trusted priority mapping from 802.11 packets to 802.3 packets when data packets are sent to the AC from an AP. To configure this parameter, run the priority-map upstream trust command. |
WMM priority downstream map mode |
Mapping from the DSCP priority to the WMM of downstream packets. |
priority upstream map mode |
Tunnel upstream mapping when the trusted mapping from 802.11 packets to tunnel packets is DSCP, and data packets are sent to the AC from an AP. |
Traffic Type |
Traffic control type. |
Direction(Traffic Type: traffic-filter) |
Direction of packets to be filtered. To configure this parameter, run the traffic-filter (traffic profile view) command. |
AppliedRecord(Traffic Type: traffic-filter) |
ACL-based packet filtering records. To configure this parameter, run the traffic-filter (traffic profile view) command. |
Direction(Traffic Type: traffic-remark) |
Direction to which packet priority re-marking is applied. To configure this parameter, run the traffic-remark (traffic profile view) command. |
RemarkType |
Packet priority re-marking type. To configure this parameter, run the traffic-remark (traffic profile view) command. |
RemarkValue |
Re-marked packet priority value. To configure this parameter, run the traffic-remark (traffic profile view) command. |
AppliedRecord(Traffic Type: traffic-remark) |
ACL-based packet priority re-marking record. To configure this parameter, run the traffic-remark (traffic profile view) command. |
# Display configurations of all traffic profiles.
<HUAWEI> display traffic-profile all
----------------------------------------------------
Profile name Reference
----------------------------------------------------
default 3
1 1
p1 0
----------------------------------------------------
Total: 3
Item |
Description |
|---|---|
Profile name |
Profile name. To configure this parameter, run the traffic-profile (WLAN view) command. |
Reference |
Number of times a location profile is referenced. |