display traffic-statistics vsi peer ldp129

Function

The display traffic-statistics vsi peer ldp129 command displays the statistics about the public traffic on a BGP-AD VPLS PW in a specified VSI.

Format

display traffic-statistics vsi vsi-name peer peer-address ldp129

Parameters

Parameter	Description	Value
vsi-name	Specifies the name of a VSI. The specified VSI must be a VSI of the BGP-AD VPLS.	The value is an existing VSI.
peer-address	Specifies the peer IP address of the PW.	-
ldp129	Specifies the statistics about the public traffic in the BGP-AD VPLS that uses LDP 129 signaling.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After the BGP-AD VPLS configuration is complete, you can run the display traffic-statistics vsi peer ldp129 command to view the statistics about the traffic on the PW.

Prerequisites

The following operations have been performed before this command is used:

The BGP-AD VPLS has been configured.
The traffic statistics function has been enabled using the traffic-statistics enable (VSI-BGPAD view) command or the traffic-statistics peer enable (VSI-BGPAD) command in the VSI-BGPAD view.

Precautions

The display traffic-statistics vsi peer ldp129 command only displays the statistics about the traffic on the PW in the BGP-AD VPLS.
Within five minutes, if a PW goes Down, traffic before the PW is Down cannot be used to compute the traffic rate in the five minutes.

Example

# Display the statistics about the public traffic on the specified PW in the BGP-AD VPLS.

<HUAWEI> display traffic-statistics vsi vplsad1 peer 10.22.33.20 ldp129
vsi-name: vplsad1
Peer-address: 10.22.33.20
Statistics last cleared: never
Last 300 seconds input rate : 0 bytes/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 packets/sec
Input: 0 bytes, 0 packets
Output: 0 bytes, 0 packets

**Table 1** Description of the display traffic-statistics vsi peer ldp129 command output
Item	Description
vsi-name	VSI name.
Peer-address	IP address of the peer device.
Statistics last cleared	Last time when statistics are cleared.
Last 300 seconds input rate	Rate of incoming traffic in the last 300 seconds.
Last 300 seconds output rate	Rate of outgoing traffic in the last 300 seconds.
Input	Number of packets received by the PW from the AC.
Output	Number of packets sent from the PW to the AC.