display trunkfwdtbl eth-trunk

Function

The display trunkfwdtbl eth-trunk command displays the forwarding table of an Eth-Trunk.

Format

display trunkfwdtbl eth-trunk trunk-id

Parameters

Parameter	Description	Value
trunk-id	Specifies the ID of an Eth-Trunk.	The value is an integer. The value varies according to device model: S2720-EI, S5720I-SI, S5720-LI, S5720S-LI, S5720S-SI, and S5720-SI: 0-119 S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S5735-L, S5735S-L, S5735S-L-M, S5735-S, S5735-S-I, S5735S-S, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S: 0-127 S5730-SI, S5730S-EI, S6720-SI, S6720S-SI, S6720-LI, S6720S-LI: 0-249 On the S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6730-H, S6730S-H, S6730-S, S6730S-S, S6720-EI, and S6720S-EI, you can run the assign trunk command to set the value, and run the display trunk configuration command to check the configuration.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

By default, an Eth-Trunk supports a maximum of eight physical member interfaces, which correspond to eight entries in the forwarding table. The eight entries correspond to HASH-KEY values 0 to 7. The system searches for outbound interfaces among active links based on HASH-KEY values.

On the S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6730-H, S6730S-H, S6730-S, S6730S-S, S6720-EI, and S6720S-EI, you can run the assign trunk command to set the value, and run the display trunk configuration command to check the configuration.

Example

# Display the forwarding table of Eth-Trunk 1. Eth-Trunk 1 has three active links.

<HUAWEI> display trunkfwdtbl eth-trunk 1
 Eth-Trunk1's forwarding table is:
GigabitEthernet0/0/1
GigabitEthernet0/0/2
GigabitEthernet0/0/3
GigabitEthernet0/0/1
GigabitEthernet0/0/2
GigabitEthernet0/0/3
GigabitEthernet0/0/1
GigabitEthernet0/0/2

**Table 1** Description of the **display trunkfwdtbl eth-trunk** command output
Item	Description
Eth-Trunk1's forwarding table	Forwarding entry of an Eth-Trunk.