display tunnel-selector

Function

The display tunnel-selector command displays the configurations of tunnel selectors of a system.

Format

display tunnel-selector [ tunnel-selector-name ]

Parameters

Parameter	Description	Value
tunnel-selector-name	Specifies the name of a tunnel selector.	The value is the name of an existing tunnel selector.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

If tunnel-selector-name is not specified in the command, the command displays the configurations of all the tunnel selectors of the system.

Example

# Display information about a tunnel selector named tps.

<HUAWEI> display tunnel-selector tps
Tunnel-selector : tps
  permit : 10 (matched counts: 0)
    Match clauses :
      if-match ip next-hop ip-prefix ipv4prefix
    Apply clauses :
      apply tunnel-policy policy1

**Table 1** Description of the **display tunnel-selector** command output
Item	Description
Tunnel-selector	Name of a tunnel selector
permit : 10	Matching mode and number of the node of the tunnel selector
Match clauses	if-match clauses
Apply clauses	apply causes