display udp-helper server

Function

The display udp-helper server command displays the VLANIF interface, destination server address, and number of relayed UDP packets.

Format

display udp-helper server [ interface interface-type interface-number ]

Parameters

Parameter	Description	Value
interface interface-type interface-number	Displays statistics about UDP broadcast packets relayed on the specified interface. interface-type specifies the interface type. interface-number specifies the interface number.	The interface type must be VLANIF.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

This command displays statistics about packets relayed by UDP helper. The statistics help you monitor the UDP helper function.

If no parameter is specified, statistics about relayed packets on all VLANIF interfaces are displayed.

This command collects statistics on only the packets forwarded by the UDP helper server. Successful packet forwarding depends on the reachable route.

Example

# Display statistics about relayed packets on VLANIF 100.

<HUAWEI> display udp-helper server interface vlanif 100
vlan-interface        Server-Ip                   packet-num
Vlanif100           10.10.10.10                            0

**Table 1** Description of the **display udp-helper server** command output
Item	Description
vlan-interface	VLANIF interface on which UDP packets are relayed.
Server-Ip	Destination server address. You can run the udp-helper server command to set the destination server address.
packet-num	Number of packets sent to the destination server.