display users

Function

The display users command displays login information of each user interface.

Format

display users [ all ]

Parameters

Parameter	Description	Value
all	Displays information about all users who log in to a device through user interfaces, including information about user interfaces that are not connected. If the all parameter is not used, the command displays information only about user interfaces that have been connected.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view information about users who are connected to a device. The information includes the user name, IP address, and authentication and authorization information.

The user with a level of 0, 1, or 2 can only view related information about users of the same or a lower level. A user with a level of 3 or above can view login information of all users.

Example

# Display information about users who log in to the device through user interfaces.

<HUAWEI> display users

  User-Intf   Delay     Type   Network Address     AuthenStatus    AuthorcmdFlag

  34 VTY 0   00:00:00  TEL    10.164.6.10            pass            no

  Username : user1

+ 35 VTY 1   00:00:00  TEL    10.164.6.15            pass            no

  Username : user2

**Table 1** Description of the **display users** command output
Item	Description
+	User interface in use.
User-Intf	The number in the first column under User-Intf indicates the absolute number of the user interface, and the number in the second column under User-Intf indicates the relative number of the user interface. User Interface type. Console: Users who log in through the console port VTY: Users who log in using VTY LTT: User logs in stack system through the non-master switch console port WEB: Users who log in through Web system
Delay	Interval from the user's latest input to the current time, in seconds.
Type	Connection type. Console Telnet SSH Web
Network Address	IP address of the login user.
Username	User name for logging in to the device. If the user name is not specified, Unspecified is displayed.
AuthenStatus	Whether the authentication succeeds.
AuthorcmdFlag	Command line authorization status. yes: Command line authentication is enabled. no: Command line authentication is disabled.