display vap create-fail-record

Function

The display vap create-fail-record command displays records about VAP creation failures.

Format

display vap create-fail-record { ap-mac ap-mac | all }

Parameters

Parameter	Description	Value
ap-mac ap-mac	Displays records about VAP creation failures on an AP with the specified MAC address.	The AP's MAC address must exist.
all	Displays records about VAP creation failures on all APs.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display vap create-fail-record command to check records about VAP creation failures.

Example

# Display all records about VAP creation failures.

<HUAWEI> display vap create-fail-record all
Rf/WLAN: Radio ID/WLAN ID    
-------------------------------------------------------------------------------
AP MAC          Rf/WLAN  Profile Name  Source Type  
VAP Type        Reason      
-------------------------------------------------------------------------------
e468-a350-8a60  0/4      1             ap-group     
Service         Preshared key is not configured.
e468-a350-8a60  1/4      1             ap-group     
Service         Preshared key is not configured.
e468-a350-8a60  0/6      1             ap-group     
Service         Preshared key is not configured.
e468-a350-8a60  1/6      1             ap-group     
Service         Preshared key is not configured.
-------------------------------------------------------------------------------
Total records: 4

**Table 1** Description of the **display vap create-fail-record all** command output
Item	Description
AP MAC	MAC address of an AP.
Rf/WLAN	Radio ID/WLAN ID.
Profile Name	VAP profile name.
Source Type	Object to which the VAP is bound, including: ap-group: AP group ap-id: AP
VAP Type	VAP type, including: Service: Service VAP WDS: WDS VAP Mesh: Mesh VAP
Reason	Reason why the VAP fails to be created. Table 2 describes detailed reasons.

**Table 2** Reasons for VAP creation failures
Reason for VAP Creation Failures	Remarks	Suggestion
The VAPs using WEP encryption on an AP cannot use the same key ID.	-	Check the configuration of the VAP profile or security profile.
Invalid WEP key index.	-	Check whether the security profile is configured correctly.
Preshared key is not configured.	-	Configure a pre-shared key.
Only one management VAP profile can be bound.	-	Delete the management VAP that has been configured.
The bridge is enabled. Please undo first.	WLAN IDs 13 and 14 are used to set up a WDS bridge. Select other WLAN IDs or delete the WDS configuration.	Select another WLAN ID or delete the WDS configuration.
WLAN ID(16) is used. Please undo first.	WLAN ID 16 is used to set up a Mesh link. Select another WLAN ID or delete the Mesh configuration.	Select another WLAN ID or delete the Mesh configuration.
Only one temporary management vap-profile can be bound to an AP.	-	Delete the offline management VAP that has been configured.
The current country code does not support 5GHz frequency band.	-	Change the country code, or do not create a 5 GHz VAP.
The current country code does not support 2.4GHz frequency band.	-	Change the country code, or do not create a 2.4 GHz VAP.
The AP type does not support the wlan id.	-	Delete unused VAPs.
This AP type does not support WDS function.	-	Replace the AP with one supporting WDS.
This AP type does not support Mesh function.	-	Replace the AP with one supporting Mesh.
The number of VAPs has reached the upper limit.	-	Delete excess VAPs.
The AP does not support 5GHz frequency band.	-	Change the AP, or do not create a 5 GHz VAP.
The AP does not support 2.4GHz frequency band.	-	Change the AP, or do not create a 2.4 GHz VAP.
The AP does not support 802.1X+WEP.	-	Replace the AP with one in compliance with 802.11ac Wave 2.
SFN roaming can be configured only on one VAP of each radio.	-	Create a VAP on another radio or delete the SFN roaming VAP on the current radio.
The AP does not support SFN.	-	Replace the AP with one supporting SFN roaming.
The 5G radio of the AP does not support SFN.	-	Replace the AP or change the 5 GHz radio configuration.
The number of VAPs has reached the card specific.	-	Reduce the number of VAPs on a card, or enable the AP to go online on another card of the switch and create VAPs.
The AP in this version does not support PPSK authentication.	-	Upgrade the AP to V200R010C00 or later.
The AP in this version does not support Navi-AC VAPs.	-	Upgrade the AP to V200R010C00 or later.
Unknown reason, error code is 0x%x.	-	Contact technical support personnel.
The number of WDS VAPs has reached the upper limit.	-	Delete redundant WDS VAPs.
The number of Mesh VAPs has reached the upper limit.	-	Delete redundant Mesh VAPs.