display vlan-translation resource

Function

The display vlan-translation resource command displays VLAN translation resource usage.

Format

display vlan-translation resource [ slot slot-number ]

Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.

Parameters

Parameter	Description	Value
slot slot-number	Displays VLAN translation resource usage in a specified slot.	The value is an integer and must be an existing slot on the device.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

The display vlan-translation resource command displays VLAN translation resource usage, including the total number of inbound/outbound VLAN translation resources, the number of used VLAN translation resources, and the number of remaining VLAN translation resources. The command output helps you manage VLAN translation resources, and locate faults of insufficient VLAN translation resources caused by VLAN Mapping or Selective QinQ.

Example

# Display VLAN translation resource usage.

<HUAWEI> display vlan-translation resource slot 0
 Interface:
   GigabitEthernet0/0/1 to GigabitEthernet0/0/48
-------------------------------------------------
 Type      Total      Configured      Remaining
-------------------------------------------------
 Ingress   65536      0               65536      
 Egress    65536      0               65536

**Table 1** Description of the display vlan-translation resource command output
Item	Description
Interface	Interface where VLAN translation is performed.
Type	VLAN translation resource type, which can be Ingress or Egress.
Total	Total number of VLAN translation resources.
Configured	Number of used VLAN translation resources.
Remaining	Number of remaining VLAN translation resources.