The display vrrp6 state-change interface vrid command displays status changes of a specified VRRP6 group. This command can display a maximum of the latest 10 status changes of a VRRP6 group.
Parameter | Description | Value |
---|---|---|
interface-type interface-number | Specifies the type and number of an interface where status changes of a VRRP6 group are displayed. | - |
virtual-router-id | Specifies the VRID of a VRRP6 group. | The VRID of the VRRP6 group must have been created. |
When the VRRP6 status becomes abnormal, run the display vrrp6 state-change interface vrid command to view the latest 10 status changes of the VRRP6 group. The command output includes the time when the VRRP6 group status changed, VRRP6 group status before and after each change, and causes of the status changes. The command output helps you locate faults.
# Display status changes of VRRP6 group 1 on VLANIF 100.
<HUAWEI> display vrrp6 state-change interface vlanif 100 vrid 1
Time SourceState DestState Reason ------------------------------------------------------------------------------- 2012-05-19 20:36:44 Initialize Backup interface up 2012-05-19 20:37:07 Backup Master protocol timer expired
Item |
Description |
---|---|
Time |
Time when the VRRP6 status changed. |
SourceState |
Status before the change:
|
DestState |
Status after the change:
|
Reason |
Reason of the change in the status of the VRRP6 backup group:
|