display wlan calibrate global configuration

Function

The display wlan calibrate global configuration command displays the global configuration of radio calibration.

Format

display wlan calibrate global configuration

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display wlan calibrate global configuration command to check the global configuration of radio calibration.

Example

# Display the global configuration of radio calibration.

<HUAWEI> display wlan calibrate global configuration
--------------------------------------------------------------------------------
----------
Mode                                                 : manual
Auto start time                                      : -
Auto interval(min)                                   : -
Schedule time                                        : -
Schedule time-range                                  : -
Flexible radio mode                                  : auto-switch
Policy                                               : -
Sensitivity                                          : medium
Virtual group size                                   : 50
K-value                                              : 70
Reference data analysis                              : enable
Environment deterioration blacklist threshold        : 16
--------------------------------------------------------------------------------
----------

**Table 1** Description of the **display wlan calibrate global configuration** command output
Item	Description
Mode	Radio calibration mode. To configure this parameter, run the calibrate enable { auto \| manual \| schedule time } command.
Auto start time	Start time of automatic radio calibration (only for the automatic mode). To configure this parameter, run the calibrate enable auto [ interval interval-value [ start-time start-time ] ] command.
Auto interval(min)	Automatic radio calibration interval (only for the automatic mode). To configure this parameter, run the calibrate enable auto [ interval interval-value [ start-time start-time ] ] command.
Schedule time	Scheduled radio calibration time (only for the scheduled mode). To configure this parameter, run the calibrate enable schedule time time-value command.
Schedule time-range	Scheduled radio calibration time range (only for the scheduled mode). To configure this parameter, run the calibrate enable schedule time time-value [ time-range time-range-name ] command.
Flexible radio mode	Redundant radio switchover mode. To configure this parameter, run the calibrate flexible-radio { auto-switch \| auto-off } command.
Policy	Radio calibration policy. To configure this parameter, run the calibrate policy { rogue-ap \| non-wifi \| noise-floor } command.
Sensitivity	Radio calibration sensitivity. To configure this parameter, run the calibrate sensitivity { high \| medium \| low \| insensitivity \| custom-threshold custom-threshold } command.
Virtual group size	Parameter of the radio calibration algorithm. To configure this parameter, run the calibrate virtual-group-size size-value k-value k-value command.
K-value	Parameter of the radio calibration algorithm. To configure this parameter, run the calibrate virtual-group-size size-value k-value k-value command.
Reference data analysis	Whether to enable Big Data calibration. To configure this parameter, run the calibrate reference data-analysis disable command.
Environment deterioration blacklist threshold	Blacklist threshold for the number of times the channel environment deteriorates. To configure this parameter, run the calibrate environment-deterioration-blacklist threshold command.