domain-name

Function

The domain-name command configures the domain name suffix for the DHCP client.

The undo domain-name command deletes a configured domain name suffix.

By default, no domain name suffix is configured.

Format

domain-name domain-name

undo domain-name

Parameters

Parameter	Description	Value
domain-name	Specifies a domain name to be assigned to a DHCP client.	The value is a string of 1 to 63 characters without spaces. NOTE: When quotation marks are used around the string, spaces are allowed in the string.

Views

IP address pool view, DHCP Option template view

Default Level

2: Configuration level

Usage Guidelines

This command applies to DHCP servers. When allocating IP addresses to the client, the DHCP server also specifies domain names for clients. Run the domain-name command on the DHCP server to specify a domain name. When allocating IP addresses to clients, the DHCP server also sends the domain names to the clients.

To configure a domain name for an interface address pool, run the dhcp server domain-name (interface view) command.

Example

# In the IP address pool view, configure the domain name suffix assigned to the DHCP client as example.com.

<HUAWEI> system-view
[HUAWEI] ip pool test
[HUAWEI-ip-pool-test] domain-name example.com

# In the DHCP Option template, configure the domain name suffix assigned to the DHCP client as huawei.com.

<HUAWEI> system-view
[HUAWEI] dhcp option template template1
[HUAWEI-dhcp-option-template-template1] domain-name huawei.com