dot1x-access-profile (authentication profile view)

Function

The dot1x-access-profile command binds an authentication profile to an 802.1X access profile.

The undo dot1x-access-profile command unbinds an authentication profile from an 802.1X access profile.

By default, an authentication profile is not bound to an 802.1X access profile.

Format

dot1x-access-profile access-profile-name

undo dot1x-access-profile

Parameters

Parameter	Description	Value
access-profile-name	Specifies the name of an 802.1X access profile.	The value must be the name of an existing 802.1X access profile.

Views

Authentication profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The authentication type used by an authentication profile is determined by the access profile bound to the authentication profile. After being bound to an 802.1X access profile, the authentication profile is enabled with 802.1X authentication. After the authentication profile is applied to the interface or VAP profile, 802.1X authentication can be performed on online users.

Prerequisites

An 802.1X access profile has been created using the dot1x-access-profile (system view) command.

Follow-up Procedure

Run the authentication-profile (Interface view or VAP profile view) command to apply the authentication profile to the interface or VAP profile.

Precautions

An authentication profile can be bound to only one 802.1X access profile.

Example

# Bind the authentication profile dot1x_authen_profile1 to the 802.1X access profile dot1x_access_profile1.

<HUAWEI> system-view
[HUAWEI] dot1x-access-profile name dot1x_access_profile1
[HUAWEI-dot1x-access-profile-dot1x_access_profile1] quit
[HUAWEI] authentication-profile name dot1x_authen_profile1
[HUAWEI-authen-profile-dot1x_authen_profile1] dot1x-access-profile dot1x_access_profile1