dot1x abnormal-track cache-record-num

Function

The dot1x abnormal-track cache-record-num command sets the maximum number of EAP packets that can be recorded for abnormal 802.1X authentication.

The undo dot1x abnormal-track cache-record-num command restores the default maximum number of EAP packets that can be recorded for abnormal 802.1X authentication.

By default, the device can record a maximum of 20 EAP packets for abnormal 802.1X authentication.

Format

dot1x abnormal-track cache-record-num cache-record-num

undo dot1x abnormal-track cache-record-num

Parameters

Parameter	Description	Value
cache-record-num	Specifies the maximum number of EAP packets that can be recorded for abnormal 802.1X authentication.	The value is an integer in the range from 0 to 30. The value 0 indicates that no EAP packet is recorded for abnormal 802.1X authentication.

Parameter

Description

Value

cache-record-num

Specifies the maximum number of EAP packets that can be recorded for abnormal 802.1X authentication.

The value is an integer in the range from 0 to 30.

The value 0 indicates that no EAP packet is recorded for abnormal 802.1X authentication.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

If 802.1X authentication fails, you need to check the EAP packets to locate the fault. This command allows you to set the maximum number of EAP packets that the device can record for abnormal 802.1X authentication.

Example

# Set the maximum number of EAP packets that can be recorded for abnormal 802.1X authentication to 30.

<HUAWEI> system-view
[HUAWEI] dot1x abnormal-track cache-record-num 30