dot1x eap-notify-packet

Function

The dot1x eap-notify-packet command enables the device to send an EAP packet code number to users.

The undo dot1x eap-notify-packet command disables the device from sending an EAP packet code number to users.

By default, the device is disabled from sending an EAP packet code number to users.

Format

dot1x eap-notify-packet eap-code code-number data-type type-number

undo dot1x eap-notify-packet [ eap-code code-number data-type type-number ]

Parameters

Parameter	Description	Value
eap-code code-number	Specifies an EAP packet code number sent to users.	The value is an integer that ranges from 5 to 255.
data-type type-number	Specifies the data type in EAP packets sent to users.	The value is an integer that ranges from 1 to 255.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a non-Huawei device used as the RADIUS server sends RADIUS packets with attribute 61, EAP packet code number 0xa (hexadecimal notation, 10 in decimal notation), and data type 0x19 (hexadecimal notation, 25 in decimal notation) to the device, run the dot1x eap-notify-packet command on the device so that the device can send EAP packets with code number 0xa and data type 0x19 to users. If the dot1x eap-notify-packet command is not executed, the device does not process EAP packets of this type and users are disconnected.

Precautions

The device can only process EAP packets with code number 10 and data type 25.

Example

# Allow the device to send EAP packets with code number 10 and data type 25 to users.

<HUAWEI> system-view
[HUAWEI] dot1x eap-notify-packet eap-code 10 data-type 25