dot1x handshake packet-type
Function
The dot1x handshake packet-type command sets the type of 802.1X authentication handshake packets.
The undo dot1x handshake packet-type command restores the default type of 802.1X authentication handshake packets.
By default, the type of 802.1X authentication handshake packets is request-identity.
Format
dot1x handshake packet-type { request-identity | srp-sha1-part2 }
undo dot1x handshake packet-type
Parameters
| Parameter | Description | Value |
|---|---|---|
request-identity |
Indicates that the type of 802.1X authentication handshake packets is request-identity. |
- |
srp-sha1-part2 |
Indicates that the type of 802.1X authentication handshake packets is srp-sha1-part2. |
- |
Usage Guidelines
During 802.1X authentication, different vendors' devices support different handshake packet types. By default, the device uses 802.1X authentication handshake packets of the request-identity type. If a device connected to the non-Huawei device uses the 802.1X authentication handshake packets of the srp-sha1-part2 type, run the dot1x handshake packet-type command to set the type of 802.1X authentication handshake packets to srp-sha1-part2.
The dot1x handshake packet-type command takes effect only for users who log in after the command is run.