dynamic-edca threshold

Function

The dynamic-edca threshold command configures the threshold for the dynamic EDCA Best-Effort service.

The undo dynamic-edca threshold command restores the default threshold for the dynamic EDCA Best-Effort service.

The default threshold for the dynamic EDCA Best-Effort service is 6 pps.

Format

dynamic-edca threshold be-service be-service-threshold

undo dynamic-edca threshold be-service

Parameters

Parameter	Description	Value
be-service be-service-threshold	Specifies the threshold for the dynamic EDCA Best-Effort service.	The value is an integer that ranges from 1 to 1000, in pps.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

When dynamic EDCA is enabled, the system dynamically adjusts EDCA parameters for the Best-Effort service based on the number of active users, improving user experience.

If the number of Best-Effort service packets from a user in the radio's internal statistics queue exceeds the specified threshold (specified using the dynamic-edca threshold command), the user is considered an active user.

Before running this command, you must run the dynamic-edca enable command to enable dynamic EDCA.

Example

# Set the threshold for the dynamic EDCA Best-Effort service to 10 pps.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name default
[HUAWEI-wlan-rrm-prof-default] dynamic-edca enable
[HUAWEI-wlan-rrm-prof-default] dynamic-edca threshold be-service 10